F5F Stay Refreshed Hardware Desktop Problem with the new PC not showing output on the GPU.

Problem with the new PC not showing output on the GPU.

Problem with the new PC not showing output on the GPU.

L
LunaTheNeko
Junior Member
5
09-23-2021, 05:09 PM
#1
I began upgrading my previous setup. Everything was installed and I tested by booting from the motherboard display. Then I added my old 3080ti, which is a reliable GPU. However, once it's installed, I can't turn off the display on either the motherboard or the GPU. I'm seeking advice on possible mistakes or checks to make. Also, whenever I remove the GPU, the display returns to being enabled. Please share your specs if you have them.
L
LunaTheNeko
09-23-2021, 05:09 PM #1

I began upgrading my previous setup. Everything was installed and I tested by booting from the motherboard display. Then I added my old 3080ti, which is a reliable GPU. However, once it's installed, I can't turn off the display on either the motherboard or the GPU. I'm seeking advice on possible mistakes or checks to make. Also, whenever I remove the GPU, the display returns to being enabled. Please share your specs if you have them.

J
Joakim0805
Junior Member
9
09-23-2021, 11:14 PM
#2
Set the BIOS via the built-in pin. Some MSI boards didn’t adjust properly until I changed the settings. Hope this helps! Feel free to share your progress.
J
Joakim0805
09-23-2021, 11:14 PM #2

Set the BIOS via the built-in pin. Some MSI boards didn’t adjust properly until I changed the settings. Hope this helps! Feel free to share your progress.

L
Loroi
Member
137
09-24-2021, 02:44 PM
#3
Question, are you using a Display port cable or HDMI. Sometimes DP has to initialize and it can be funky sometimes. HDMI is hot swappable. Also is it possible the port went bad on your 3080ti, have you tried different ports on the GPU. I know this sounds like a long shot, but have you tried the lower pcie slot, sometimes PCIE slots can be DOA. This is also another strange problem that I had. My Aorus FV43u monitor that i have literally would never display something until i hard reset it, I resolved this issue by updating my monitor software. You could also make sure your monitor is up to date if it has software capabilities. If you are using a riser cable, is it Gen 4 and is it set to gen 4 in the bios. If it isnt, sometimes that could cause a no signal as well. I hope this gives a few options to try. Let us know.
L
Loroi
09-24-2021, 02:44 PM #3

Question, are you using a Display port cable or HDMI. Sometimes DP has to initialize and it can be funky sometimes. HDMI is hot swappable. Also is it possible the port went bad on your 3080ti, have you tried different ports on the GPU. I know this sounds like a long shot, but have you tried the lower pcie slot, sometimes PCIE slots can be DOA. This is also another strange problem that I had. My Aorus FV43u monitor that i have literally would never display something until i hard reset it, I resolved this issue by updating my monitor software. You could also make sure your monitor is up to date if it has software capabilities. If you are using a riser cable, is it Gen 4 and is it set to gen 4 in the bios. If it isnt, sometimes that could cause a no signal as well. I hope this gives a few options to try. Let us know.