F5F Stay Refreshed Hardware Desktop Problem with the computer not turning on

Problem with the computer not turning on

Problem with the computer not turning on

Pages (2): 1 2 Next
U
united32
Senior Member
433
03-30-2021, 11:21 PM
#1
U
united32
03-30-2021, 11:21 PM #1

M
MrDyen
Junior Member
16
04-03-2021, 06:08 PM
#2
Specs?
M
MrDyen
04-03-2021, 06:08 PM #2

Specs?

S
Study
Junior Member
24
04-03-2021, 10:25 PM
#3
The GPU model is 2070 Super with 8GB RAM.
S
Study
04-03-2021, 10:25 PM #3

The GPU model is 2070 Super with 8GB RAM.

A
AppleFighter
Member
76
04-14-2021, 09:21 AM
#4
It seems you're asking about a PCpp specification page. Could you clarify what details you need?
A
AppleFighter
04-14-2021, 09:21 AM #4

It seems you're asking about a PCpp specification page. Could you clarify what details you need?

T
ToxicStripe
Member
53
04-24-2021, 08:34 AM
#5
CPU model: Intel i7 9700k at 3.6GHz
GPU: Nvidia Gainward 2070 Super
RAM: 2x16 GB 32GB Corsair Vengeance RGB DDR4
Cooler: Coolermaster MA410M
Motherboard: Gigabyte Z390 Aorus Elite ATX L1511
Power Supply: Seasonic Focus Fully Modular 650W Gold ATX
HDD: Seagate 2 x 4TB 5900RPM SSD
NVMe Drive: ADATA XPG SX8200 Pro M2 2280
T
ToxicStripe
04-24-2021, 08:34 AM #5

CPU model: Intel i7 9700k at 3.6GHz
GPU: Nvidia Gainward 2070 Super
RAM: 2x16 GB 32GB Corsair Vengeance RGB DDR4
Cooler: Coolermaster MA410M
Motherboard: Gigabyte Z390 Aorus Elite ATX L1511
Power Supply: Seasonic Focus Fully Modular 650W Gold ATX
HDD: Seagate 2 x 4TB 5900RPM SSD
NVMe Drive: ADATA XPG SX8200 Pro M2 2280

S
SteinAdler9
Junior Member
7
04-24-2021, 09:32 AM
#6
Clear the CMOS and check the e debug LEDs. Observe what they show. Test each stick individually. Verify all front panel connectors are securely connected.
S
SteinAdler9
04-24-2021, 09:32 AM #6

Clear the CMOS and check the e debug LEDs. Observe what they show. Test each stick individually. Verify all front panel connectors are securely connected.

U
UmudPVP
Junior Member
31
04-24-2021, 02:32 PM
#7
Where exactly are the debug LEDs positioned on your board? They should be close to the 24-pin MB connector according to online sources, but you haven’t noticed them yet. Are you missing something?
U
UmudPVP
04-24-2021, 02:32 PM #7

Where exactly are the debug LEDs positioned on your board? They should be close to the 24-pin MB connector according to online sources, but you haven’t noticed them yet. Are you missing something?

A
Aeg11_
Junior Member
33
04-25-2021, 10:42 AM
#8
It's hard to see due to the cable obstructing the boot process. If it doesn't start, look for a light indicator. And remember to do this ^
A
Aeg11_
04-25-2021, 10:42 AM #8

It's hard to see due to the cable obstructing the boot process. If it doesn't start, look for a light indicator. And remember to do this ^

L
LadyBiscoito
Member
111
04-27-2021, 11:19 AM
#9
I located the LED indicators you mentioned at the bottom of your MB. It seems the issue started when I turned on the PSU (the -/o) setting, but the LEDs didn’t activate—they stayed off. The heatsink logo kept blinking, which was confusing.
L
LadyBiscoito
04-27-2021, 11:19 AM #9

I located the LED indicators you mentioned at the bottom of your MB. It seems the issue started when I turned on the PSU (the -/o) setting, but the LEDs didn’t activate—they stayed off. The heatsink logo kept blinking, which was confusing.

P
PhantomAvenge
Junior Member
12
04-28-2021, 08:01 AM
#10
The system isn't able to start on its own.
P
PhantomAvenge
04-28-2021, 08:01 AM #10

The system isn't able to start on its own.

Pages (2): 1 2 Next