F5F Stay Refreshed Hardware Desktop Problem with starting the PC.

Problem with starting the PC.

Problem with starting the PC.

Pages (3): 1 2 3 Next
G
Grezlock
Junior Member
19
05-27-2016, 01:22 AM
#1
Last night I powered off my PC completely for maintenance, then restarted it. Since then it hasn’t booted again. I’ve tried recharging the CMOS battery but that didn’t help. For roughly a month I experienced a problem where pressing the start button wouldn’t get me into BIOS, but using the reset button would work, eventually leading to a complete failure to start.
G
Grezlock
05-27-2016, 01:22 AM #1

Last night I powered off my PC completely for maintenance, then restarted it. Since then it hasn’t booted again. I’ve tried recharging the CMOS battery but that didn’t help. For roughly a month I experienced a problem where pressing the start button wouldn’t get me into BIOS, but using the reset button would work, eventually leading to a complete failure to start.

L
leprincePOSAY
Junior Member
37
05-27-2016, 07:59 AM
#2
It could be a broken wire in the start button circuit or the power button header on the motherboard has fallen out.
L
leprincePOSAY
05-27-2016, 07:59 AM #2

It could be a broken wire in the start button circuit or the power button header on the motherboard has fallen out.

M
MechanoidBlue
Member
62
05-27-2016, 04:32 PM
#3
The button functions properly. When activated, all the LEDs illuminate and the fans start operating.
M
MechanoidBlue
05-27-2016, 04:32 PM #3

The button functions properly. When activated, all the LEDs illuminate and the fans start operating.

J
JGood456
Member
168
05-28-2016, 10:56 PM
#4
Disconnect the power button connections on the motherboard header, and if it functions properly, your case's power button may be faulty!
J
JGood456
05-28-2016, 10:56 PM #4

Disconnect the power button connections on the motherboard header, and if it functions properly, your case's power button may be faulty!

W
wiped_out
Member
208
05-29-2016, 01:19 PM
#5
I didn’t take apart the whole PC. Just removed the external connections, cleaned it up, and then reconnected it. I’d also like to try turning it on briefly.
W
wiped_out
05-29-2016, 01:19 PM #5

I didn’t take apart the whole PC. Just removed the external connections, cleaned it up, and then reconnected it. I’d also like to try turning it on briefly.

I
iTestify
Member
95
06-12-2016, 07:22 PM
#6
Do you already have a motherboard speaker set up? Also, might there be a power supply problem—like if the motherboard or GPU isn’t working properly, it could still keep your fans and LEDs running?
I
iTestify
06-12-2016, 07:22 PM #6

Do you already have a motherboard speaker set up? Also, might there be a power supply problem—like if the motherboard or GPU isn’t working properly, it could still keep your fans and LEDs running?

D
DrBsTigger
Member
59
07-01-2016, 02:31 PM
#7
Refers to audio outputs on the motherboard that connect via the 3.5 mm jack on the case.
D
DrBsTigger
07-01-2016, 02:31 PM #7

Refers to audio outputs on the motherboard that connect via the 3.5 mm jack on the case.

X
xRockiSatiago
Junior Member
40
07-02-2016, 05:56 AM
#8
I don't believe I have a beeper on my motherboard.
X
xRockiSatiago
07-02-2016, 05:56 AM #8

I don't believe I have a beeper on my motherboard.

S
smit0086
Member
80
07-02-2016, 07:09 AM
#9
Could it be that you accidentally inserted the wrong connections?
S
smit0086
07-02-2016, 07:09 AM #9

Could it be that you accidentally inserted the wrong connections?

G
GeorgePlaysFTW
Senior Member
261
07-02-2016, 09:01 AM
#10
Hi there! The message isn't about what you did, but how to figure things out step by step. When I clean my system and run into issues, I break it down and test each part carefully. I start with the basics: power supply, mainboard, one memory stick, CPU, cooler. If that works, I add another memory stick, then a hard drive, and finally connect peripherals like the front panel. Each time I add something, I verify it still functions. I try plugging in components one by one—keyboard first, then mouse, USB devices, displays, and the HDD. After each connection, I check if everything boots properly. It helps to follow a process and test one thing at a time.
G
GeorgePlaysFTW
07-02-2016, 09:01 AM #10

Hi there! The message isn't about what you did, but how to figure things out step by step. When I clean my system and run into issues, I break it down and test each part carefully. I start with the basics: power supply, mainboard, one memory stick, CPU, cooler. If that works, I add another memory stick, then a hard drive, and finally connect peripherals like the front panel. Each time I add something, I verify it still functions. I try plugging in components one by one—keyboard first, then mouse, USB devices, displays, and the HDD. After each connection, I check if everything boots properly. It helps to follow a process and test one thing at a time.

Pages (3): 1 2 3 Next