F5F Stay Refreshed Hardware Desktop Problem with starting from RAM Issue with booting from RAM

Problem with starting from RAM Issue with booting from RAM

Problem with starting from RAM Issue with booting from RAM

E
Envil_
Member
126
03-09-2022, 08:41 AM
#1
I assemble my system then verified the RAM speed was only 5200 while it should be 6400, leading me to suspect an XMP setting. After opening BIOS and activating the EXPO profile, my RAM displayed a maximum of 3600 and I believed it was due to a memory multiplier configuration or similar. I adjusted it to 64 saved and restarted the PC, which prompted a boot failure message with load optimized defaults, followed by reboot and entering BIOS again. I’m unable to interact with any controls. Refer to your guide here: https://uk.pcpartpicker.com/list/gjVh9C
E
Envil_
03-09-2022, 08:41 AM #1

I assemble my system then verified the RAM speed was only 5200 while it should be 6400, leading me to suspect an XMP setting. After opening BIOS and activating the EXPO profile, my RAM displayed a maximum of 3600 and I believed it was due to a memory multiplier configuration or similar. I adjusted it to 64 saved and restarted the PC, which prompted a boot failure message with load optimized defaults, followed by reboot and entering BIOS again. I’m unable to interact with any controls. Refer to your guide here: https://uk.pcpartpicker.com/list/gjVh9C

V
ViralControl
Member
187
03-10-2022, 11:17 AM
#2
Load CMOS into BIOS and choose the 6000M memory setting manually
V
ViralControl
03-10-2022, 11:17 AM #2

Load CMOS into BIOS and choose the 6000M memory setting manually