F5F Stay Refreshed Hardware Desktop Problem with PC showing after crash.

Problem with PC showing after crash.

Problem with PC showing after crash.

R
Runnergirl15
Member
246
01-10-2017, 06:56 AM
#1
My PC experienced crashes occasionally while playing OW. During recovery attempts, the monitor reactivated as if receiving input but then shut down again. Red indicators appeared on the motherboard near the RAM slots, leading me to suspect a RAM issue. I followed these steps since the problem began:

Links shared:
https://www.reddit.com/r/computers/comme...ter_crash/
I removed the power cable, tried a different outlet, disconnected the DP (GPU input), and tested running it on another monitor. I also cleared dust from the case and replaced the RAM with a new one. After that, I removed the GPU and connected directly to the motherboard.

Current specs:
CPU: i7-7800K
CPU cooler: Corsair Hydro Series H100i
Motherboard: MSI Z370I Pro Carbon AC
RAM: Corsair Vengeance LPX (2x8) DDR4 3000MHz
Storage: 1 GB SSD/HDD
GPU: EVGA 1080 Ti SC2
Power supply: Corsair SF600 SFX (2018)
Case: NZXT H200
Operating system: Windows 10 Home
Display: Dell 144 Hz 1440p S2716DG
R
Runnergirl15
01-10-2017, 06:56 AM #1

My PC experienced crashes occasionally while playing OW. During recovery attempts, the monitor reactivated as if receiving input but then shut down again. Red indicators appeared on the motherboard near the RAM slots, leading me to suspect a RAM issue. I followed these steps since the problem began:

Links shared:
https://www.reddit.com/r/computers/comme...ter_crash/
I removed the power cable, tried a different outlet, disconnected the DP (GPU input), and tested running it on another monitor. I also cleared dust from the case and replaced the RAM with a new one. After that, I removed the GPU and connected directly to the motherboard.

Current specs:
CPU: i7-7800K
CPU cooler: Corsair Hydro Series H100i
Motherboard: MSI Z370I Pro Carbon AC
RAM: Corsair Vengeance LPX (2x8) DDR4 3000MHz
Storage: 1 GB SSD/HDD
GPU: EVGA 1080 Ti SC2
Power supply: Corsair SF600 SFX (2018)
Case: NZXT H200
Operating system: Windows 10 Home
Display: Dell 144 Hz 1440p S2716DG

M
M4blast
Member
67
01-10-2017, 03:13 PM
#2
When sharing a troubleshooting thread, it's standard to provide complete system details. List them as follows:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Include the PSU age along with its make and model.
BIOS version for your motherboard at this time (if you remember).
M
M4blast
01-10-2017, 03:13 PM #2

When sharing a troubleshooting thread, it's standard to provide complete system details. List them as follows:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Include the PSU age along with its make and model.
BIOS version for your motherboard at this time (if you remember).