F5F Stay Refreshed Hardware Desktop Problem with PC lights from fans

Problem with PC lights from fans

Problem with PC lights from fans

T
TheDragoclaw
Junior Member
33
01-06-2021, 02:50 AM
#1
Processor: Intel corie i5 13400f
Motherboard: Asus Prime B760m-A wifi DDR5
Ram: G.Skill Ripjaws S5 6000mhz
Nvme: lexar Nm720 1tb
Vga Card: Nvidia Rx4060 8gb
CPu Cooler: Thermalright assassin king 120 se
PSU: Corsair cx 650 80 plus brownz
Case: Ease 125 b with eight argb infinity fans

My issue concerns the argb lights on the case and cooler fans. All fans are connected via the motherboard argb header, and the effect of the fan lights is controlled by Asus Armoury crate software. Initially, all argb fans operated normally when I powered on the PC. However, after 10 or 15 seconds, the argb fans would stop completely for about 3 to 5 seconds. After that, the lights would turn back on and everything functioned properly again. This behavior seems normal for argb lighting.

Thanks in advance.
T
TheDragoclaw
01-06-2021, 02:50 AM #1

Processor: Intel corie i5 13400f
Motherboard: Asus Prime B760m-A wifi DDR5
Ram: G.Skill Ripjaws S5 6000mhz
Nvme: lexar Nm720 1tb
Vga Card: Nvidia Rx4060 8gb
CPu Cooler: Thermalright assassin king 120 se
PSU: Corsair cx 650 80 plus brownz
Case: Ease 125 b with eight argb infinity fans

My issue concerns the argb lights on the case and cooler fans. All fans are connected via the motherboard argb header, and the effect of the fan lights is controlled by Asus Armoury crate software. Initially, all argb fans operated normally when I powered on the PC. However, after 10 or 15 seconds, the argb fans would stop completely for about 3 to 5 seconds. After that, the lights would turn back on and everything functioned properly again. This behavior seems normal for argb lighting.

Thanks in advance.

L
Levin1912
Junior Member
42
01-06-2021, 09:54 AM
#2
Just sounds like some sort of software loading procedure and when the software's ready everything's fine. Most systems and argb devices start out with the default fabled rainbow pattern and when the software loads your personal setup pattern there's a momentary reset change and then its fine.
L
Levin1912
01-06-2021, 09:54 AM #2

Just sounds like some sort of software loading procedure and when the software's ready everything's fine. Most systems and argb devices start out with the default fabled rainbow pattern and when the software loads your personal setup pattern there's a momentary reset change and then its fine.

S
SkullyRoger
Member
147
01-08-2021, 12:41 AM
#3
Thank you for your response. I believe this action is typical.
S
SkullyRoger
01-08-2021, 12:41 AM #3

Thank you for your response. I believe this action is typical.