Problem with NVIDIA 4060 TI 16GB display flickering
Problem with NVIDIA 4060 TI 16GB display flickering
Remove any debris from the PCIe slot before packing or placing other items inside. Once everything is secure, ensure the lock engages properly. The final setup should match the ones on the memory units. Verify that your memory is seated correctly as described. Refer to the motherboard manual for the correct slots. Make sure the PSU power leads match the pin configuration and plug type. Some connectors have square pins while others have angled corners. I’ve noticed someone swapping an 8-core CPU for an 8-pin GPU—just push firmly if needed, as it can work surprisingly well. For fun, consider a recent upgrade: two days of hair loss and a new motherboard. Check the BIOS to confirm your graphics card is displayed correctly. Please list all components of your PC, including model details, so helpers can assist effectively. Until then, this should get you started.
Additionally here are my components: CPU – AMD Ryzen 7 7700X 4.5 GHz 8-Core ($269.99 from Amazon), CPU Cooler – Corsair iCUE H100i ELITE CAPELLIX XT 65.57 CFM Liquid ($141.18 on Amazon), Motherboard – MSI B650 GAMING PLUS WIFI ATX AM5 ($149.99 from Newegg), Memory – Corsair Dominator Platinum RGB 32 GB (2 x 16 GB) DDR5-6200 CL36 ($160.99 on Amazon), Storage – Western Digital WD_Black SN850X 1 TB M.2-2280 PCIe 4.0 X4 NVME ($84.99 on Amazon), Video Card – Asus DUAL EVO OC GeForce RTX 4060 Ti 16 GB ($455.98 from Newegg), Case – Corsair iCUE 4000D RGB AIRFLOW ATX Mid Tower ($99.99), Power Supply – Corsair RM750e (2023) 750 W, 80+ Gold Certified, Fully Modular ATX ($99.99 on Amazon), Case Fan – Corsair iCUE SP120 RGB ELITE 47.7 CFM, 3-Pack ($49.99 from Newegg). Note: I observed another shortened pin on the GPU PCIe connection side.
The pins work correctly when BIOS is configured with the video set to PCIe instead of IGPN. Make sure your motherboard model is recognized as PCIe, not IGPN. The manual contains unclear information—check the site for the correct link on advanced settings. If needed, initiate the graphic adapter and set it to PEG. Have you updated the BIOS?