Problem with connecting to specific devices on your local network.
Problem with connecting to specific devices on your local network.
I considered this before but couldn't locate any relevant settings in my local firewall or antivirus configurations (Kaspersky Total Security). I haven’t searched extensively yet, so I’ll try again to check for anything obvious. Regarding the router, the only firewall options available are a simple on/off switch—amazing flexibility! I attempted to turn it off to test, but it didn’t resolve the issue. For extra safety, I’ve blocked the first few entries in my IP address list just in case. Please note, I’ve marked several sections with “x” to further restrict visibility, though the maximum is 255. For reference, here’s a quick breakdown:
Desktop: IP: xxxx.xxxx.0.34
Subnet mask: 255.255.255.0
Default gateway: xxxx.xxxx.0.1
Laptop: IP: xxxx.xxxx.0.25
Subnet mask: 255.255.255.0
Default gateway: xxxx
I’m ready to provide more details if needed.
They’re asking whether the numbers always represent the same thing, like whether xxxx.xxxx is always 192.168. If not, it might start with 10 or 172. If not, you’re likely using public IP ranges in a private network, which could cause routing issues.
Check the link and consider using your router's built-in interface or ping utility to test connectivity.
It was a bit of a twist with the firewall. I managed to locate the Kaspersky settings and noticed some restrictions. Now I’m getting ready for the final part. As someone new to this, I’m not sure which settings to adjust or what the effects might be. Turning off the firewall works perfectly, but I still want it on to stay my friend, so I’ll keep it active while allowing file transfers between the two machines.
I think your connection was marked as public, which might explain why the restrictions seem lifted. Have you made any adjustments yet? ICMP is already active, so a ping should function properly.
It functions well when the firewall is turned off completely, though I appreciate having it on—it's like a trusted friend. Still, I want to retain it while permitting file transfer traffic between my two devices. Even if granted access, keeping the network private might just turn off the firewall automatically. It seems the safest approach is to monitor for unusual activity rather than disabling it outright. Personally, I avoid installing firewalls on LAN clients; they're better left to the router.
I successfully got it operational through a bit of testing. Since there were limited choices, I adjusted the settings to allow non-blocking traffic on local TCP and UDP ports. Now everything is working smoothly with my drive connected properly to the other machine.