Problem with CAT 6a color code termination
Problem with CAT 6a color code termination
I have a 10Gbps Cat6A cable and I need to link it to my router. I have the plug and some connectors, but when unrolling the wire I saw that the white wires are solid white and there’s no green, blue, orange, or brown color. Based on the twisted pairs, the blue pair should be blue and white, while the green pair is green and white. Could you guide me through the connection? Your work is important, so thanks for your help!
White, orange, orange, white, green, blue, blue, green, white, brown, brown. Adjust the orange and green sections at just one end to create a crossover cable. Remove a bit more of the cable jacket without further unwinding the pairs so you can identify which white wire matches each color. A matching-color tracer stripe should be present.
It might ruin the cable if you don’t match the wires correctly. You can try simple visual checks—compare colors, shapes, and markings—to see if they fit properly. Without special tools, you won’t get precise results, but a quick glance should help you decide.
Because your white wires aren't properly matched, I'll interpret that as mixing them up. That definitely causes issues. Keep the pairs together. If you're not strictly adhering to those color codes and just swap ends, it might still function. Technicians will be frustrated, but it should work. Just ensure the colors match the same order on both sides unless you're using a crossover cable. Avoid random connections—it's a habit to steer clear of.
If it doesn't match the approved colour standard, I wouldn't trust it as a CAT6a.