F5F Stay Refreshed Hardware Desktop Problem with B550-e M.2 slot

Problem with B550-e M.2 slot

Problem with B550-e M.2 slot

Pages (2): 1 2 Next
A
ArdVeneno
Junior Member
41
05-18-2020, 11:42 AM
#1
Hello, my Asus B550-E is having an issue with its second NVMe drive. One slot works perfectly with the SN750 1TB, but the other appears only sometimes. I've already filed a return request for the SN550 1TB, but the problem continues. I've installed a WD Blue SSD in the second M.2 slot, and it functions properly there too. The original SN750 was also in that slot before, so it worked initially. Whenever it disappears, it no longer shows up in BIOS, disk management tools, or the WD SSD software. The drive has been reinserted several times—sometimes it helps, other times it doesn't. The motherboard indicates two NVMe drives should be compatible, but I'm not sure why it's failing.
A
ArdVeneno
05-18-2020, 11:42 AM #1

Hello, my Asus B550-E is having an issue with its second NVMe drive. One slot works perfectly with the SN750 1TB, but the other appears only sometimes. I've already filed a return request for the SN550 1TB, but the problem continues. I've installed a WD Blue SSD in the second M.2 slot, and it functions properly there too. The original SN750 was also in that slot before, so it worked initially. Whenever it disappears, it no longer shows up in BIOS, disk management tools, or the WD SSD software. The drive has been reinserted several times—sometimes it helps, other times it doesn't. The motherboard indicates two NVMe drives should be compatible, but I'm not sure why it's failing.

J
jameszx32
Junior Member
8
05-25-2020, 11:02 AM
#2
You're experiencing the same problem with your 1TB SN550 drive, which is installed as a secondary storage device alongside your primary 970 Evo drive. You're checking if the second slot appears correctly on the controller board. It seems the issue might be related to how the system recognizes the drive slots—only showing up during a reboot or startup, not when the computer is idle. Additionally, you're facing frequent Bluetooth controller disconnections, especially during gameplay, and plan to discuss that in another thread soon.
J
jameszx32
05-25-2020, 11:02 AM #2

You're experiencing the same problem with your 1TB SN550 drive, which is installed as a secondary storage device alongside your primary 970 Evo drive. You're checking if the second slot appears correctly on the controller board. It seems the issue might be related to how the system recognizes the drive slots—only showing up during a reboot or startup, not when the computer is idle. Additionally, you're facing frequent Bluetooth controller disconnections, especially during gameplay, and plan to discuss that in another thread soon.

B
BobDerMaurer
Member
176
05-26-2020, 09:29 AM
#3
It's the second M.2 slot, and the same problem occurs—appearing after reseating or restarting, but it still doesn't fix it. I believe it's a broader drive issue, as similar problems have been reported across different configurations.
B
BobDerMaurer
05-26-2020, 09:29 AM #3

It's the second M.2 slot, and the same problem occurs—appearing after reseating or restarting, but it still doesn't fix it. I believe it's a broader drive issue, as similar problems have been reported across different configurations.

K
kastorxx
Member
50
05-26-2020, 11:25 AM
#4
Check if you're using the latest drivers for your board and ensure the antenna is connected, which may improve Bluetooth performance. I don't use Bluetooth on my PC at the moment.
K
kastorxx
05-26-2020, 11:25 AM #4

Check if you're using the latest drivers for your board and ensure the antenna is connected, which may improve Bluetooth performance. I don't use Bluetooth on my PC at the moment.

M
MrSarx
Senior Member
375
05-28-2020, 07:55 AM
#5
Sorry for the update, but I discovered this discussion while solving my own issue. I noticed the same situation with the WD SN550 1TB being detected sporadically in the second slot of an Asus Strix B550-E. I own two boards and two drives, so I can recreate the problem using both boards and both drives. For the new setup, I’ve switched to PCIE4 drives in the first slot since they operate at that interface, while the older PCIE3 SN550s (which performed well in previous systems) are now placed in the second slot. On cold starts, the drive isn’t detected at all, but after a warm restart it’s detected around half the time and functions correctly. I’ve already submitted a support ticket with Asus and am awaiting their response.
M
MrSarx
05-28-2020, 07:55 AM #5

Sorry for the update, but I discovered this discussion while solving my own issue. I noticed the same situation with the WD SN550 1TB being detected sporadically in the second slot of an Asus Strix B550-E. I own two boards and two drives, so I can recreate the problem using both boards and both drives. For the new setup, I’ve switched to PCIE4 drives in the first slot since they operate at that interface, while the older PCIE3 SN550s (which performed well in previous systems) are now placed in the second slot. On cold starts, the drive isn’t detected at all, but after a warm restart it’s detected around half the time and functions correctly. I’ve already submitted a support ticket with Asus and am awaiting their response.

L
LOUDDUD
Member
55
05-28-2020, 06:09 PM
#6
I'm facing the same problem with my MSI Gaming Edge B550. The SSD in the secondary M.2 slot has inconsistent detection, and it seems similar to an SN550. It might be that the SN550 isn't performing well with the B550 PCIe switch setup. Have you received any updates from Asus? Thanks.
L
LOUDDUD
05-28-2020, 06:09 PM #6

I'm facing the same problem with my MSI Gaming Edge B550. The SSD in the secondary M.2 slot has inconsistent detection, and it seems similar to an SN550. It might be that the SN550 isn't performing well with the B550 PCIe switch setup. Have you received any updates from Asus? Thanks.

A
ash_n_brad
Posting Freak
778
05-28-2020, 07:59 PM
#7
They requested adjustments to the BIOS, thinking it might affect device detection during startup, but those settings were for power-saving features. I remained doubtful about their impact, and I shared my concerns with Asus without receiving any follow-up.
A
ash_n_brad
05-28-2020, 07:59 PM #7

They requested adjustments to the BIOS, thinking it might affect device detection during startup, but those settings were for power-saving features. I remained doubtful about their impact, and I shared my concerns with Asus without receiving any follow-up.

B
Bazza130202
Senior Member
386
06-03-2020, 05:57 AM
#8
This concern appears to be linked to the 1TB variant of the drive, since my other units include a 500GB SN550 which is unaffected by the issue.
B
Bazza130202
06-03-2020, 05:57 AM #8

This concern appears to be linked to the 1TB variant of the drive, since my other units include a 500GB SN550 which is unaffected by the issue.

M
MoathyJr
Member
164
06-03-2020, 08:44 AM
#9
Just to confirm, the 500GB SN550 works without issues in both M.2 slots? I own two 1TB SN550 units, and the one connected directly to the CPU runs perfectly. It seems the problem could involve both the 1TB model plus a direct M.2 connection to the B550. I've filed tickets with WD and MSI, and I'll share any useful tips here.
M
MoathyJr
06-03-2020, 08:44 AM #9

Just to confirm, the 500GB SN550 works without issues in both M.2 slots? I own two 1TB SN550 units, and the one connected directly to the CPU runs perfectly. It seems the problem could involve both the 1TB model plus a direct M.2 connection to the B550. I've filed tickets with WD and MSI, and I'll share any useful tips here.

F
Fatryx
Member
235
06-03-2020, 09:59 AM
#10
The problem seems to affect the Asus B550-E, especially the SN550 1TB version, particularly the secondary PCIe 3 M.2 port.
F
Fatryx
06-03-2020, 09:59 AM #10

The problem seems to affect the Asus B550-E, especially the SN550 1TB version, particularly the secondary PCIe 3 M.2 port.

Pages (2): 1 2 Next