Problem RAM Speed 2133 to 3600 Resolved

Person_
Member

126

06-19-2019, 09:16 PM

Hey there, I've seen the same thing too. Your RAM is stuck at 2133MHz instead of the intended 3600MHz. The issue might be related to BIOS settings or memory timings. Try checking if the RAM supports XMP and see if enabling it fixes it. Also, ensure your CPU and motherboard are compatible with that speed. If you set it manually to 3600MHz and get errors, it could indicate a conflict. Let me know what you find!

Person_

06-19-2019, 09:16 PM #1

Bazeik
Junior Member

06-19-2019, 11:30 PM

Try reinstalling your CPU; some connections may not be properly established with the socket pins for the IMC. Once done, it should function correctly. Alternatively, you can manually configure the RAM speed to 3600.

Bazeik

06-19-2019, 11:30 PM #2

xXJay_BugXx
Senior Member

559

06-25-2019, 07:20 PM

They mentioned this approach. Increase the voltage by a bit above the XMP standard and check for stable booting. If it doesn’t work, reduce it to 3200 and adjust timing to C16 or lower. You’ll get comparable results but with better stability on AMD systems that prioritize latency over speed.

xXJay_BugXx

06-25-2019, 07:20 PM #3

JackofallPc
Member

07-14-2019, 01:16 AM

BTW, adjusted to 1,350V and 3200mhz didn't help

JackofallPc

07-14-2019, 01:16 AM #4

BTW, adjusted to 1,350V and 3200mhz didn't help

ByWeaadox
Member

07-14-2019, 09:29 AM

The part is almost out of stock according to the JEDEC standard, whereas I thought it should be between 1.45 and 1.5V. Still, it’s pretty disappointing if it’s still available.

ByWeaadox

07-14-2019, 09:29 AM #5

The part is almost out of stock according to the JEDEC standard, whereas I thought it should be between 1.45 and 1.5V. Still, it’s pretty disappointing if it’s still available.

eryk123621
Member

07-16-2019, 03:46 AM

I resolved the issue by placing DIMM4 in DIMM2 since HYNIX is on A1/A2, while Samsung is on B1/B2, DIMM3 and 4. XMP functions correctly now without any changes. Thanks for your help @SorryClaire.

eryk123621

07-16-2019, 03:46 AM #6

I resolved the issue by placing DIMM4 in DIMM2 since HYNIX is on A1/A2, while Samsung is on B1/B2, DIMM3 and 4. XMP functions correctly now without any changes. Thanks for your help @SorryClaire.