F5F Stay Refreshed Hardware Desktop Problem persists with CMOS reset, no resolution found.

Problem persists with CMOS reset, no resolution found.

Problem persists with CMOS reset, no resolution found.

M
MissValentine
Junior Member
13
05-09-2022, 12:11 AM
#1
Your computer isn't responding to the Duel Channel RAM setup. After trying all possible configurations with two RAM sticks and four slots, it won't work unless it's set to A1:A2. I cleared the CMOS via the jumper pins and reset all frequencies to 3200, but the problem persists. The GPU won't power on until the RAM is in that same configuration. Someone, can you suggest a solution?
M
MissValentine
05-09-2022, 12:11 AM #1

Your computer isn't responding to the Duel Channel RAM setup. After trying all possible configurations with two RAM sticks and four slots, it won't work unless it's set to A1:A2. I cleared the CMOS via the jumper pins and reset all frequencies to 3200, but the problem persists. The GPU won't power on until the RAM is in that same configuration. Someone, can you suggest a solution?

J
Jose1261
Junior Member
3
05-09-2022, 06:22 AM
#2
Get the complete details? Start with the base frequency, skip the testing, and check if it starts up.
J
Jose1261
05-09-2022, 06:22 AM #2

Get the complete details? Start with the base frequency, skip the testing, and check if it starts up.

T
TheSnowBooy
Junior Member
8
05-09-2022, 07:52 AM
#3
Are you posting with one stick in slot B? Is this a fresh PC or has this only recently appeared on a current setup? Do you have an integrated GPU? If yes, attempt to remove the GPU and switch to B2 A2 settings to check for conflicts. I’m experiencing a problem with my server where the disabled B channel leads to posting failures, especially when using a 10Gb NIC in the PCIe lane, which may also trigger unusual RAM behavior.
T
TheSnowBooy
05-09-2022, 07:52 AM #3

Are you posting with one stick in slot B? Is this a fresh PC or has this only recently appeared on a current setup? Do you have an integrated GPU? If yes, attempt to remove the GPU and switch to B2 A2 settings to check for conflicts. I’m experiencing a problem with my server where the disabled B channel leads to posting failures, especially when using a 10Gb NIC in the PCIe lane, which may also trigger unusual RAM behavior.

C
Chip_EX
Junior Member
4
05-10-2022, 05:38 AM
#4
No it will not post in B1:B2 and I am using a Sapphire 5700 xt paired with a ryzen 5 3600 - so no iGPU And this is a new build
C
Chip_EX
05-10-2022, 05:38 AM #4

No it will not post in B1:B2 and I am using a Sapphire 5700 xt paired with a ryzen 5 3600 - so no iGPU And this is a new build