F5F Stay Refreshed Power Users Overclocking Problem overclocking i7 8700k

Problem overclocking i7 8700k

Problem overclocking i7 8700k

J
JGBCRAFT
Member
65
05-21-2017, 11:35 AM
#1
I have a Z370 asRock Extreme 4 and I'm attempting to push my i7 8700K up to 5GHz, but it won't even reach 4.7 on a reasonable voltage and keeps crashing. I'm using the pre-set 4.7 OC with Manual mode, which works for my i7 6700K at 4.7 and at a lower voltage doesn't help. My i7 8700K at 4.7 and 1.36V is functioning, while my friends' machine at 4.7 and 1.30V does not. Is there anything else in the BIOS that needs adjusting so it can reach 5GHz? Any suggestions would be appreciated.
J
JGBCRAFT
05-21-2017, 11:35 AM #1

I have a Z370 asRock Extreme 4 and I'm attempting to push my i7 8700K up to 5GHz, but it won't even reach 4.7 on a reasonable voltage and keeps crashing. I'm using the pre-set 4.7 OC with Manual mode, which works for my i7 6700K at 4.7 and at a lower voltage doesn't help. My i7 8700K at 4.7 and 1.36V is functioning, while my friends' machine at 4.7 and 1.30V does not. Is there anything else in the BIOS that needs adjusting so it can reach 5GHz? Any suggestions would be appreciated.

D
drako_sky
Member
166
05-21-2017, 12:46 PM
#2
It seems you didn’t secure the win in the silicon lottery. You might try increasing the voltage slightly on a coffee lake board if it’s of decent quality, but keep thermals stable. It’s safer to aim for 4.7Ghz and 1.36v rather than 5Ghz with voltages above 1.4v. Make sure your PSU can handle the load before proceeding.
D
drako_sky
05-21-2017, 12:46 PM #2

It seems you didn’t secure the win in the silicon lottery. You might try increasing the voltage slightly on a coffee lake board if it’s of decent quality, but keep thermals stable. It’s safer to aim for 4.7Ghz and 1.36v rather than 5Ghz with voltages above 1.4v. Make sure your PSU can handle the load before proceeding.

S
SolaPvP
Junior Member
11
05-22-2017, 02:07 PM
#3
It seems you didn’t secure the win in the silicon lottery. You might try increasing the voltage slightly on a coffee lake board if it’s of decent quality, but keep thermals stable. Stability at 4.7Ghz and 1.36v is better than 5Ghz with voltages above 1.4v. Make sure your PSU can handle the load before proceeding.
S
SolaPvP
05-22-2017, 02:07 PM #3

It seems you didn’t secure the win in the silicon lottery. You might try increasing the voltage slightly on a coffee lake board if it’s of decent quality, but keep thermals stable. Stability at 4.7Ghz and 1.36v is better than 5Ghz with voltages above 1.4v. Make sure your PSU can handle the load before proceeding.

Y
yalex27
Senior Member
461
05-29-2017, 07:35 PM
#4
What kind of CPU cooling system are you employing?
Y
yalex27
05-29-2017, 07:35 PM #4

What kind of CPU cooling system are you employing?