Private network in dormitory setting
Private network in dormitory setting
Hello! (Hey there!) I’m new to the folk high school dorm and wanted to set up my own local network with a router connected to the school’s system. (•̀ᴗ•) I checked with the administration—they use a standard WPA2 network without any login pages. (No Ethernet ports in the dorms, just Wi-Fi access points in the hallways.) Do you have any suggestions on how to achieve this?
The initial concern is understanding your motivation for this action. If the goal is to bypass restricted sites, alternative methods exist, and even if stricter measures are implemented, your own network wouldn<|pad|> to remain unaffected.
Primarily for a dedicated LAN setup and to provide Ethernet access in the dorm. Right now, anyone at school could take control of my Chromecast.
You can set up your own private network by purchasing a switch and connecting your devices. However, gaining internet access on that setup adds another layer of complexity. The main challenge is understanding the terms of service for your school’s network. It’s possible that using their connection through your private network could lead to disciplinary action, such as being expelled. There are cases where individuals face accusations of "hacking" and subsequent expulsion, so it’s wise to verify your rights before proceeding. Make sure you know what you’re allowed to do first—your education shouldn’t be jeopardized by someone misinterpreting your actions.
I talked to the headmaster, who also manages IT, about this. He wasn’t sure how to proceed without causing IP conflicts. He advised me simply to follow his instructions and avoid disrupting the network. Outside of drugs, alcohol, and crime, they tend to be lenient on rules—so long as I don’t harm any equipment, I should stay out of trouble. I’m certain the router setup is similar to a typical home router, except for the subnet mask and a more strict firewall. I’ll let him know before I add new equipment. Edit: added the final note
He can easily check which IP ranges are active and provide an extra one. Also, using NAT eliminates the requirement for static routes.