Potential faulty RAM module detected.
Potential faulty RAM module detected.
I recently experienced an issue with my PC. In short, I removed the AM4 cooler to replace the thermal paste multiple times and accidentally bent some CPU pins during the process. While adjusting the pins, I damaged 4-5 of them. After reassembly, I noticed a burning smell when I powered it on, so I turned it off immediately. Interestingly, the system reported after that even though the CPU lacked those pins, but only had one RAM module and didn’t support dual-channel settings. I’ve ordered replacement parts, but I suspect one of my RAM modules might be overheating or defective. Could a CPU pin have been a memory management pin, or is there a faulty DIMM socket?
It seems the opposite side now makes more sense, likely because the B channel failed.
You asked for some Greek help with the message you received. Regarding the pins, they could have broken off or simply bent—either way, there are ways to fix it. For the overheating RAM stick, plug it in by itself, then run the memory stress test from the software. Standard DDR4 modules can handle up to 85°C, so that part should be fine.
The pins came loose because I made some risky adjustments while trying to repair them. A few broke off, especially with the ram stick—it didn’t hold properly when tested alone. It seems fixing the pins requires soldering, but I don’t have a kit or much practice. Thanks again!