Port problem: DMC‑700SC Gigabit Ethernet Adapter - 1000Mbit/s TP (RJ-45) to 1000Mbit/s SX (SC-Duplex)

F5F Stay Refreshed Power Users Networks Port problem: DMC‑700SC Gigabit Ethernet Adapter - 1000Mbit/s TP (RJ-45) to 1000Mbit/s SX (SC-Duplex)

Port problem: DMC‑700SC Gigabit Ethernet Adapter - 1000Mbit/s TP (RJ-45) to 1000Mbit/s SX (SC-Duplex)

Port problem: DMC‑700SC Gigabit Ethernet Adapter - 1000Mbit/s TP (RJ-45) to 1000Mbit/s SX (SC-Duplex)

C

Crafter_015
Member

162

09-20-2016, 07:37 AM

#1

Hi, I have a large box labeled "old" DMC‑700SC. Each unit costs around 10€, while the new version is about 200€. The issue I’m dealing with involves two dip switches for settings, and it seems the settings aren’t working properly. I found the manual for Revision A here: https://eu.dlink.com/de/de/-/media/busin...080811.pdf. I’m using Revision B8, but everything looks the same on both ends. I only have one pair running, and I can’t disconnect them because the LAN runs through the pair. What should I do? I checked the cable with a flashlight, and my dad (also an IT engineer) noticed the light, so it shouldn’t be broken. Any suggestions?

C

Crafter_015

09-20-2016, 07:37 AM #1

Hi, I have a large box labeled "old" DMC‑700SC. Each unit costs around 10€, while the new version is about 200€. The issue I’m dealing with involves two dip switches for settings, and it seems the settings aren’t working properly. I found the manual for Revision A here: https://eu.dlink.com/de/de/-/media/busin...080811.pdf. I’m using Revision B8, but everything looks the same on both ends. I only have one pair running, and I can’t disconnect them because the LAN runs through the pair. What should I do? I checked the cable with a flashlight, and my dad (also an IT engineer) noticed the light, so it shouldn’t be broken. Any suggestions?