Poor performance even after upgrading?
Poor performance even after upgrading?
Hey everyone,
I’m sharing my setup details:
GTX 1060 3GB
MSI 990FXA Gaming Mobo
FX-8350 at 4.4ghz, 1.38v (upgraded from FX-6300 at 4.5ghz, 1.38v)
Patriot Viper 8gb DDR3-1600 RAM
I planned to switch to the FX-8350 to avoid bottlenecks, but after an overclock test on BF1, performance remains weak—around 30-50fps at 25 ping with the ultra preset. Even with previous configurations that achieved 60fps, I haven’t seen similar results. The GPU usage stays between 60-78%, and CPU around 70-80%. RAM was in the high 80s.
I’m unsure why my system lags compared to others with nearly identical specs. Only BF1 was running on it, but I experienced driver issues and other errors before. If this persists after upgrading the CPU, I have no clear solution.
The RAM...
An 8 GB setup with an FX 8350 isn't ideal. The suggested setup is typically 16 GB at 1866mhz. Running it at 1600Mhz is possible, but 8 GB will cause a bottleneck. This was the case for me too, using an FX 4350 chip running at 4.9 Ghz, which still managed high benchmarks. I thought an 8350 would break my previous records, but it didn't. Different chips have different capabilities, which is why the 6300 performed well with 8 GB, while the 8350 didn't. Remember, AMD single and dual core scores are significantly slower than Intel. The 8350 excels in multicore tests, but struggles with single-core tasks. This chip behaves more like a 4-core processor, whereas the 6300...
At first glance, it seems there are some misunderstandings here.
Indeed, similar PC builds can function almost identically or with minimal variation.
However, numerous elements influence this outcome.
Firstly, temperature plays a key role: every gamer knows that high temperatures can damage components and reduce performance. This phenomenon is known as thermal throttling. If airflow is insufficient or the cooling system is inadequate, especially in a warm environment, you may face thermal throttling. To maximize your GPU’s performance, lowering the temperatures is essential—this might involve adding more fans, upgrading the case, or reducing ambient heat.
Secondly, the drivers installed matter; ensure they are fully updated.
Thirdly, the overall health of your PC matters. A dusty and poorly maintained old i7-4770k will perform significantly worse than a brand-new one.
Lastly, it’s worth noting that you’re not overclocking the GPU, adding extra voltage, or disabling basic protections.
Check everything and let me know if you can identify what’s happening!
Cheers!
Hey ramlethal,
Even though your suggestions are useful, I've already thought about those aspects. My fans are running around 80 percent and my temperatures are normal, with no signs of throttling detected. I've performed clean installs for my GPU drivers and kept them updated regularly. My CPU is brand new, not a week old, and I dust the rest of the system monthly—I've only owned it for about a year and a half. If by GPU you meant CPU, I've turned off the locks as per the tutorials on that motherboard and adjusted the voltage accordingly. If you meant GPU, I haven't overclocked it. I'm still puzzled about this but thank you for your advice.
The RAM...
An 8 GB configuration with an FX 8350 isn’t ideal. The standard recommendation is 16 GB at 1866mhz. Running it at 1600Mhz is possible, but it will cause a bottleneck. This was the case for me too, using an FX 4350 chip that operated at 4.9 Ghz, and I achieved high benchmarks at that time. Assuming an 8350 would break my previous records. Wrong... Different chips have different capabilities. The 6300 performed well with 8 GB, while the 8350 didn’t. Remember, AMD single and dual core scores are significantly slower than Intel. The 8350 excels in multicore tests, but struggles with single-core tasks. It behaves more like a 4-core chip compared to the 6300 series, and the 4350 acts like a single-core unit. AMD...
I managed to improve benchmark results by adjusting the FSB frequency. Have you tried that? I increased the FSB speed to around 275 and it helped overall performance. However, it took considerable time to stabilize everything. I spent a lot of effort benchmarking and closely monitored temperatures.
Regarding your RAM, how many modules do you have? This is important for the 8350 because it performs better in dual-channel mode. If you have just one module, that could be another problem. With two or more modules, try setting the RAM to 1866mhz if you’re comfortable and your motherboard supports it. Some modules can run at that speed even at 1600mhz, provided you increase the voltage. You also have Viper memory... Is it the green-colored variant? I experienced issues with a green-colored Viper DDR3 Green 1600mhz module paired with the 8350. Frequent crashes, random BSODs, and inconsistent stress test results plagued me. I replaced it with a cheaper model, which resolved the problem. That was my experience, though.
I really enjoyed that chip, but it ultimately limited my progress. I opted for an i5 4670k and haven’t revisited it, though I’d like to explore another 8350. Best of luck!