F5F Stay Refreshed Hardware Desktop Poor performance below expected standards

Poor performance below expected standards

Poor performance below expected standards

A
AuBaA_manou
Junior Member
48
02-22-2023, 02:37 AM
#1
I recently purchased some components for my PC and put it together myself, which isn’t the first time. I tested them with benchmarks and noticed they’re running slow. I thought maybe the drivers were the issue—so I uninstalled and reinstalled them, but the problems persisted. Here are the passmark scores. Both passmark and UserBenchmark indicate my RAM, CPU, and GPU are all under average performance, which could be linked to my motherboard.
A
AuBaA_manou
02-22-2023, 02:37 AM #1

I recently purchased some components for my PC and put it together myself, which isn’t the first time. I tested them with benchmarks and noticed they’re running slow. I thought maybe the drivers were the issue—so I uninstalled and reinstalled them, but the problems persisted. Here are the passmark scores. Both passmark and UserBenchmark indicate my RAM, CPU, and GPU are all under average performance, which could be linked to my motherboard.

H
HeteBom
Member
146
02-22-2023, 01:48 PM
#2
Your processor runs at 2133 MHz; activating XMP settings will significantly boost its performance.
H
HeteBom
02-22-2023, 01:48 PM #2

Your processor runs at 2133 MHz; activating XMP settings will significantly boost its performance.

F
finnm2002
Junior Member
22
02-23-2023, 11:33 AM
#3
Your RAM is operating at the standard DDR4 frequency of 2133MHz. To achieve the full performance rating, activate XMP settings in your BIOS configuration. This adjustment may also slightly improve your CPU's efficiency.
F
finnm2002
02-23-2023, 11:33 AM #3

Your RAM is operating at the standard DDR4 frequency of 2133MHz. To achieve the full performance rating, activate XMP settings in your BIOS configuration. This adjustment may also slightly improve your CPU's efficiency.

S
SmartBoysFart
Member
211
03-10-2023, 03:53 PM
#4
I completed the test and then started feeling uneasy about its data gathering methods. I quickly realized it might be too intrusive, so I wouldn’t repeat it. I’m unsure exactly what information it captures, but I’d avoid using it again.
S
SmartBoysFart
03-10-2023, 03:53 PM #4

I completed the test and then started feeling uneasy about its data gathering methods. I quickly realized it might be too intrusive, so I wouldn’t repeat it. I’m unsure exactly what information it captures, but I’d avoid using it again.

M
Milinia56
Member
231
03-10-2023, 05:23 PM
#5
You're aiming to improve your reading skills. Achieving higher percentiles indicates you perform better than a certain threshold. Your hardware—CPU, GPU, and storage—is solid. RAM is adequate, and using XMP settings helps. Note: the system actually highlights your GPU as excellent. Did you overlook that?
M
Milinia56
03-10-2023, 05:23 PM #5

You're aiming to improve your reading skills. Achieving higher percentiles indicates you perform better than a certain threshold. Your hardware—CPU, GPU, and storage—is solid. RAM is adequate, and using XMP settings helps. Note: the system actually highlights your GPU as excellent. Did you overlook that?

P
plumhead4
Junior Member
17
03-10-2023, 06:31 PM
#6
Completely incorrect, right? That link is just a joke.
P
plumhead4
03-10-2023, 06:31 PM #6

Completely incorrect, right? That link is just a joke.

T
The_D3mon
Senior Member
694
03-10-2023, 07:46 PM
#7
my processor isn't boosted, which might be causing the issue
T
The_D3mon
03-10-2023, 07:46 PM #7

my processor isn't boosted, which might be causing the issue

S
Swaggy_Oh_Yeah
Junior Member
10
03-10-2023, 08:06 PM
#8
What a juvenile reply. Adding your benchmark score there seems inappropriate. The CPU passmark is roughly 7000 points higher than what it claims on the site—may say excellent, but it also notes performance well below expectations for all three metrics on UserBenchmark (CPU, GPU, RAM). The 4th percentile is 1st percentile, which suggests the card isn’t top-notch. Your memory should be clocked at 3600mhz, so this could point to either a memory issue or a problem with the application.
S
Swaggy_Oh_Yeah
03-10-2023, 08:06 PM #8

What a juvenile reply. Adding your benchmark score there seems inappropriate. The CPU passmark is roughly 7000 points higher than what it claims on the site—may say excellent, but it also notes performance well below expectations for all three metrics on UserBenchmark (CPU, GPU, RAM). The 4th percentile is 1st percentile, which suggests the card isn’t top-notch. Your memory should be clocked at 3600mhz, so this could point to either a memory issue or a problem with the application.

B
BlameMyBrother
Junior Member
47
03-11-2023, 05:19 PM
#9
Verify the settings by launching CPU-Z, then navigate to the memory section. It should indicate a clock speed of 2133MHz (with an effective value of 1066) instead of the DOCP profile at 3600MHz.
B
BlameMyBrother
03-11-2023, 05:19 PM #9

Verify the settings by launching CPU-Z, then navigate to the memory section. It should indicate a clock speed of 2133MHz (with an effective value of 1066) instead of the DOCP profile at 3600MHz.

O
Outboard89
Junior Member
12
03-19-2023, 07:42 AM
#10
I've seen some discussions online about this XMP issue in the BIOS. I'm planning to try adjusting it when I'm home. It makes sense why other parts are struggling. The low RAM speed might be limiting performance, as @The Torrent mentioned earlier. Appreciate your helpful reply—it's different from what I initially thought.
O
Outboard89
03-19-2023, 07:42 AM #10

I've seen some discussions online about this XMP issue in the BIOS. I'm planning to try adjusting it when I'm home. It makes sense why other parts are struggling. The low RAM speed might be limiting performance, as @The Torrent mentioned earlier. Appreciate your helpful reply—it's different from what I initially thought.