F5F Stay Refreshed Hardware Desktop Poor Low Cinebench R23 results with a Ryzen 7 5700X in stock condition.

Poor Low Cinebench R23 results with a Ryzen 7 5700X in stock condition.

Poor Low Cinebench R23 results with a Ryzen 7 5700X in stock condition.

Pages (3): Previous 1 2 3
M
MikeDragon159
Senior Member
661
10-12-2022, 01:01 AM
#21
The CPU package shows peak readings of 78 watts in normal operation and at maximum load, increasing to 150 watts when Ryzen Master's auto OC is enabled.
M
MikeDragon159
10-12-2022, 01:01 AM #21

The CPU package shows peak readings of 78 watts in normal operation and at maximum load, increasing to 150 watts when Ryzen Master's auto OC is enabled.

L
luk321
Member
209
10-31-2022, 02:42 PM
#22
Latest BIOS installed. My Ryzen 5 2600 is working fine. I also updated the chipset drivers. All eight cores are active. It seems like the task manager lists "16 logical processors," but I can't see the individual threads.
L
luk321
10-31-2022, 02:42 PM #22

Latest BIOS installed. My Ryzen 5 2600 is working fine. I also updated the chipset drivers. All eight cores are active. It seems like the task manager lists "16 logical processors," but I can't see the individual threads.

M
MikeDragon159
Senior Member
661
11-02-2022, 04:36 AM
#23
The measurement method is unclear; it’s not specified how the clock speed was determined during testing.
M
MikeDragon159
11-02-2022, 04:36 AM #23

The measurement method is unclear; it’s not specified how the clock speed was determined during testing.

M
moa203
Junior Member
20
11-06-2022, 05:11 AM
#24
The low PBO reading suggests a possible mismatch between expectations and actual performance. I’d anticipate around 4.6GHz when PBO is active and roughly 4.2–4.3GHz without it. It’s likely the BIOS has a setting locking it at 3.7GHz, and clearing CMOS might reset that.
M
moa203
11-06-2022, 05:11 AM #24

The low PBO reading suggests a possible mismatch between expectations and actual performance. I’d anticipate around 4.6GHz when PBO is active and roughly 4.2–4.3GHz without it. It’s likely the BIOS has a setting locking it at 3.7GHz, and clearing CMOS might reset that.

Pages (3): Previous 1 2 3