F5F Stay Refreshed Hardware Desktop Please help!

Please help!

Please help!

R
Rey_Gordo6
Member
51
03-24-2023, 11:10 PM
#1
My problem is my motherboard works, but I can’t start BIOS. When I try it, it just turns off and the screen goes dark. Need help! (Sorry, I’m not very clear on my English.)
R
Rey_Gordo6
03-24-2023, 11:10 PM #1

My problem is my motherboard works, but I can’t start BIOS. When I try it, it just turns off and the screen goes dark. Need help! (Sorry, I’m not very clear on my English.)

B
balaey1
Junior Member
35
03-25-2023, 07:24 AM
#2
Are you getting any POST lights? There is a thing for this pinned in green at the top of troubleshooting
B
balaey1
03-25-2023, 07:24 AM #2

Are you getting any POST lights? There is a thing for this pinned in green at the top of troubleshooting

T
Timoteus2811
Member
56
03-25-2023, 02:00 PM
#3
The system boots normally and verifies all components. It tests the CPU briefly, then checks RAM and GPU. The boot device lights up for each component for a few seconds before turning off, allowing access to Windows without a loading screen.
T
Timoteus2811
03-25-2023, 02:00 PM #3

The system boots normally and verifies all components. It tests the CPU briefly, then checks RAM and GPU. The boot device lights up for each component for a few seconds before turning off, allowing access to Windows without a loading screen.

J
JoeyRoar
Junior Member
5
03-27-2023, 02:22 AM
#4
It seems you're facing an issue where your system isn't responding properly. Refer to your motherboard manual for instructions on how to access the BIOS screen. If the card functions but drivers are faulty, the BIOS will appear due to outdated, pre-installed drivers. Another solution is to reset CMOS; this will erase all BIOS settings, including any changes you've made. If the card is faulty, this won't resolve the problem. You might also try testing the card in a different system or using another card within that setup.
J
JoeyRoar
03-27-2023, 02:22 AM #4

It seems you're facing an issue where your system isn't responding properly. Refer to your motherboard manual for instructions on how to access the BIOS screen. If the card functions but drivers are faulty, the BIOS will appear due to outdated, pre-installed drivers. Another solution is to reset CMOS; this will erase all BIOS settings, including any changes you've made. If the card is faulty, this won't resolve the problem. You might also try testing the card in a different system or using another card within that setup.