F5F Stay Refreshed Hardware Desktop Playing games at a slower pace with a fresh, stable setup

Playing games at a slower pace with a fresh, stable setup

Playing games at a slower pace with a fresh, stable setup

Pages (2): 1 2 Next
L
larziboy
Junior Member
12
08-08-2023, 06:22 PM
#1
CPU model: 7800X3D, RAM: DDR5 2*16, GPU: 7800XT, SSD type M.2, built from scratch, drivers updated. Performance is slow and the visuals are unsatisfactory when playing games like "Tiny Tina's Wonderlands," "Valorant," "Apex," or "League of Legends." Even at 1080p it struggles, dropping to around 22 FPS. You seem confident the hardware is fine, but something is missing. The setup costs a lot less than the GPU price.
L
larziboy
08-08-2023, 06:22 PM #1

CPU model: 7800X3D, RAM: DDR5 2*16, GPU: 7800XT, SSD type M.2, built from scratch, drivers updated. Performance is slow and the visuals are unsatisfactory when playing games like "Tiny Tina's Wonderlands," "Valorant," "Apex," or "League of Legends." Even at 1080p it struggles, dropping to around 22 FPS. You seem confident the hardware is fine, but something is missing. The setup costs a lot less than the GPU price.

E
EVGRClutch
Member
245
08-09-2023, 01:57 AM
#2
A lot of things might be missing first - Can you check if xmp enabled then resize bar. Then check if there is a temp issue. If cooler didn't mount properly or a bad cooler then you hit thermal throttle. A pic of built too please.
E
EVGRClutch
08-09-2023, 01:57 AM #2

A lot of things might be missing first - Can you check if xmp enabled then resize bar. Then check if there is a temp issue. If cooler didn't mount properly or a bad cooler then you hit thermal throttle. A pic of built too please.

I
imTri
Posting Freak
786
08-14-2023, 09:23 PM
#3
Confirm the cooler installation. Monitor temperatures during cinebench r23 using hwinfo64 (sensors only). Verify the expo setting in BIOS. Adjust it back to auto if you modified anything. Provide your remaining details such as RAM speed, additional coolers, case information, etc.
I
imTri
08-14-2023, 09:23 PM #3

Confirm the cooler installation. Monitor temperatures during cinebench r23 using hwinfo64 (sensors only). Verify the expo setting in BIOS. Adjust it back to auto if you modified anything. Provide your remaining details such as RAM speed, additional coolers, case information, etc.

X
XxPIZZxX
Member
56
08-14-2023, 10:51 PM
#4
Besides the two helpful tips, I used some benchmark tools. Cinebench r23 was run on the CPU with Unigene superposition at maximum settings for 1080p. The GPU should be monitored closely, as temperatures above 85°C will cause thermal throttling. Temperatures over 95°C on the CPU follow the same pattern. If performance is poor, we can investigate further to identify the issue.
X
XxPIZZxX
08-14-2023, 10:51 PM #4

Besides the two helpful tips, I used some benchmark tools. Cinebench r23 was run on the CPU with Unigene superposition at maximum settings for 1080p. The GPU should be monitored closely, as temperatures above 85°C will cause thermal throttling. Temperatures over 95°C on the CPU follow the same pattern. If performance is poor, we can investigate further to identify the issue.

G
Grace8200
Member
58
08-14-2023, 11:02 PM
#5
The screen connects to the GPU's output ports or the motherboard's video outputs.
G
Grace8200
08-14-2023, 11:02 PM #5

The screen connects to the GPU's output ports or the motherboard's video outputs.

N
NinatoPvP
Posting Freak
899
08-18-2023, 05:40 PM
#6
Thank you for your feedback. I'm still getting the hang of these suggestions and would appreciate some clarification. Please let me know if you need any further assistance.
N
NinatoPvP
08-18-2023, 05:40 PM #6

Thank you for your feedback. I'm still getting the hang of these suggestions and would appreciate some clarification. Please let me know if you need any further assistance.

F
fadgemd
Member
190
09-06-2023, 02:11 PM
#7
Are you connecting the monitor cables to the motherboard or the GPU? If it's on the motherboard, the problem might be with the built-in CPU GPU being underpowered.
F
fadgemd
09-06-2023, 02:11 PM #7

Are you connecting the monitor cables to the motherboard or the GPU? If it's on the motherboard, the problem might be with the built-in CPU GPU being underpowered.

N
naruto162
Member
199
09-08-2023, 12:37 PM
#8
I mentioned being connected to the GPU, yet it seems your message implies it's not being used effectively.
N
naruto162
09-08-2023, 12:37 PM #8

I mentioned being connected to the GPU, yet it seems your message implies it's not being used effectively.

J
joaoplay
Member
141
09-30-2023, 07:27 AM
#9
Unigene seems to be mixing things up with igpu. It might help uninstalling DDU and reinstalling the newest driver for your GPU.
J
joaoplay
09-30-2023, 07:27 AM #9

Unigene seems to be mixing things up with igpu. It might help uninstalling DDU and reinstalling the newest driver for your GPU.

1
1234qaz12qaz
Posting Freak
773
09-30-2023, 03:25 PM
#10
You might already have wondered where the cable linking the monitor is connected to the PC. If it’s attached to the motherboard, it relies on built-in graphics. For direct GPU access, plug it straight into the GPU itself.
1
1234qaz12qaz
09-30-2023, 03:25 PM #10

You might already have wondered where the cable linking the monitor is connected to the PC. If it’s attached to the motherboard, it relies on built-in graphics. For direct GPU access, plug it straight into the GPU itself.

Pages (2): 1 2 Next