Performance issues at expected rates reported.

F5F Stay Refreshed Hardware Desktop Performance issues at expected rates reported.

MMAZZA
Member

162

10-18-2018, 11:45 PM

Hello, I own four 8GB RAM modules at 3200MHz each, installed via BIOS using d.o.c.p. The system starts unstable after booting. My configuration includes a Ryzen 7 2700X, an ASUS 450 A, a GTX 1060, and the same RAM setup.

MMAZZA

10-18-2018, 11:45 PM #1

UiteOPisa
Member

10-19-2018, 09:12 AM

Activate DOCP, adjust memory frequency to 2933mhz, and configure voltage at 1.35v.

UiteOPisa

10-19-2018, 09:12 AM #2

Activate DOCP, adjust memory frequency to 2933mhz, and configure voltage at 1.35v.

Outrage999
Junior Member

10-19-2018, 05:16 PM

I attempted to adjust the speed to 2933 and followed the previous steps.

Outrage999

10-19-2018, 05:16 PM #3

I attempted to adjust the speed to 2933 and followed the previous steps.

BriannaJ16
Member

123

10-20-2018, 02:08 AM

The CPU memory controller claims a speed of 2933mhz. This sets the limit for choosing a 3200mhz RAM. The gap is roughly 1.362%, which is minor.

BriannaJ16

10-20-2018, 02:08 AM #4

The CPU memory controller claims a speed of 2933mhz. This sets the limit for choosing a 3200mhz RAM. The gap is roughly 1.362%, which is minor.