PC won’t shut down

Pages (2): 1 2 Next

CraftArt
Member

11-15-2021, 04:34 PM

Hi, I bought a 6600 XT yesterday and installed everything. Everything worked fine until I chose to shut down the PC. When I pressed the shutdown button, sleep, or the power switch, it would turn back on shortly afterward. I’ve looked into common fixes from YouTube and search results. Any suggestions would be appreciated! System details: PSU rm650 (Corsair Gold), motherboard gigabyte Z590, CPU i5 11600K, GPU RX 6600 XT, OS Windows 10 Home. The issue started after installing the graphics card.

CraftArt

11-15-2021, 04:34 PM #1

undead_mcgill
Member

108

11-17-2021, 12:09 PM

Maybe the problem lies in the wiring for the power switch on the system board or the switch itself. Check if it's oriented correctly.

undead_mcgill

11-17-2021, 12:09 PM #2

Maybe the problem lies in the wiring for the power switch on the system board or the switch itself. Check if it's oriented correctly.

tim_ki
Member

196

11-21-2021, 06:33 PM

The issue is that I've been using this computer without a GPU since June and haven't encountered any problems.

tim_ki

11-21-2021, 06:33 PM #3

The issue is that I've been using this computer without a GPU since June and haven't encountered any problems.

LaniBooster
Senior Member

344

11-21-2021, 11:08 PM

Adjust the S3/S5 power settings in your BIOS. This is the first time you're adding a separate GPU, so your ASPM needs to be updated from its standard configuration.

LaniBooster

11-21-2021, 11:08 PM #4

Adjust the S3/S5 power settings in your BIOS. This is the first time you're adding a separate GPU, so your ASPM needs to be updated from its standard configuration.

Agent47Penguin
Member

142

11-23-2021, 06:56 AM

I’m not familiar with bios, and I couldn’t locate any information on power states there.

Agent47Penguin

11-23-2021, 06:56 AM #5

I’m not familiar with bios, and I couldn’t locate any information on power states there.

NarcosxCOL
Junior Member

11-24-2021, 10:14 AM

In the power management section, set the power button to shut down the system.

NarcosxCOL

11-24-2021, 10:14 AM #6

In the power management section, set the power button to shut down the system.

FlorProPvP
Member

115

11-25-2021, 08:25 PM

The GPU issue isn't related to the power switch or pin connections. The board gets commands from the power switch for turning on/off, sleep modes, etc. The power switch wiring might be loose, misplaced, reversed, or damaged, leading to unexpected behavior.

FlorProPvP

11-25-2021, 08:25 PM #7

hanni129
Junior Member

12-01-2021, 05:45 PM

Unplug and reinsert the chassis power button connections. It’s possible something slipped out while installing the GPU. This step helps confirm everything is secure.

hanni129

12-01-2021, 05:45 PM #8

Unplug and reinsert the chassis power button connections. It’s possible something slipped out while installing the GPU. This step helps confirm everything is secure.

kobyjames0818
Junior Member

12-02-2021, 10:35 PM

Attempted it already and had no success.

kobyjames0818

12-02-2021, 10:35 PM #9

Attempted it already and had no success.

Ghosteyez
Member

123

12-03-2021, 05:44 AM

#10

It should appear in the BIOS under Settings/Power Platform. Refer to your motherboard manual as well. Make sure to verify your BIOS configuration for this issue.

Ghosteyez

12-03-2021, 05:44 AM #10

It should appear in the BIOS under Settings/Power Platform. Refer to your motherboard manual as well. Make sure to verify your BIOS configuration for this issue.

Pages (2): 1 2 Next