F5F Stay Refreshed Hardware Desktop PC was taken away for a while and isn't starting up anymore // Lights on CPU and chassis are blinking

PC was taken away for a while and isn't starting up anymore // Lights on CPU and chassis are blinking

PC was taken away for a while and isn't starting up anymore // Lights on CPU and chassis are blinking

C
Crimsonhawk10
Junior Member
20
08-21-2017, 11:53 PM
#1
The PC was left for a while and now fails to start. All components light up initially—GPU, CPU, and chassis fan—but soon the CPU indicator shuts off, then rebounds while the chassis light goes out, repeating this cycle without any display output. The GPU stays illuminated constantly. The CPU is a Ryzen 1700 8 GB KVM DDR4 model with an Antec PSU. I've attempted several fixes: reseating RAM, swapping in another working RAM, unplugging the GPU to test booting, and reattaching some wires. Any assistance would be greatly appreciated.
C
Crimsonhawk10
08-21-2017, 11:53 PM #1

The PC was left for a while and now fails to start. All components light up initially—GPU, CPU, and chassis fan—but soon the CPU indicator shuts off, then rebounds while the chassis light goes out, repeating this cycle without any display output. The GPU stays illuminated constantly. The CPU is a Ryzen 1700 8 GB KVM DDR4 model with an Antec PSU. I've attempted several fixes: reseating RAM, swapping in another working RAM, unplugging the GPU to test booting, and reattaching some wires. Any assistance would be greatly appreciated.

S
slayer__is
Senior Member
521
08-23-2017, 06:45 AM
#2
OP mentioned PC was left unused for a few days—whether it ran or not. If the machine wasn’t running, the first idea was to check if the A320M board was outdated. Have you tried replacing the CMOS battery? Edited April 19, 2022 by An0maly_76 Added more details
S
slayer__is
08-23-2017, 06:45 AM #2

OP mentioned PC was left unused for a few days—whether it ran or not. If the machine wasn’t running, the first idea was to check if the A320M board was outdated. Have you tried replacing the CMOS battery? Edited April 19, 2022 by An0maly_76 Added more details

S
stofzuiger79
Junior Member
26
08-25-2017, 04:51 PM
#3
It sat unused for roughly four days. It's my regular vehicle. I don't have an extra CMOS chip available to test at the moment.
S
stofzuiger79
08-25-2017, 04:51 PM #3

It sat unused for roughly four days. It's my regular vehicle. I don't have an extra CMOS chip available to test at the moment.

_
_zaphire_
Member
198
08-25-2017, 05:14 PM
#4
The battery can be checked using a multimeter. Were there any weather events nearby during this period that might have caused a surge or spike? Edited April 19, 2022 by An0maly_76 Updated with additional details
_
_zaphire_
08-25-2017, 05:14 PM #4

The battery can be checked using a multimeter. Were there any weather events nearby during this period that might have caused a surge or spike? Edited April 19, 2022 by An0maly_76 Updated with additional details

N
NikeBallerBoy
Junior Member
2
08-25-2017, 07:25 PM
#5
Verify your power supply—you might have forgotten to leave it behind.
N
NikeBallerBoy
08-25-2017, 07:25 PM #5

Verify your power supply—you might have forgotten to leave it behind.

G
GuttormurX
Junior Member
8
08-25-2017, 09:07 PM
#6
Absolutely, I remember there were some power interruptions right before you turned off the computer.
G
GuttormurX
08-25-2017, 09:07 PM #6

Absolutely, I remember there were some power interruptions right before you turned off the computer.

E
ertiu99
Junior Member
18
08-26-2017, 05:51 AM
#7
Power interruptions can sometimes cause a sudden rise in voltage when electricity returns, potentially making the situation even more severe if the equipment was operating. This issue might be resolved easily, but it could be more complex. Did the machine run while connected to a UPS or surge protector? Updated April 19, 2022 by An0maly_76 Added further details
E
ertiu99
08-26-2017, 05:51 AM #7

Power interruptions can sometimes cause a sudden rise in voltage when electricity returns, potentially making the situation even more severe if the equipment was operating. This issue might be resolved easily, but it could be more complex. Did the machine run while connected to a UPS or surge protector? Updated April 19, 2022 by An0maly_76 Added further details

J
JPP_Miam
Member
108
08-28-2017, 11:31 AM
#8
The machine was active during the failure. It isn't safeguarded by any UPS system.
J
JPP_Miam
08-28-2017, 11:31 AM #8

The machine was active during the failure. It isn't safeguarded by any UPS system.

K
KupesanDDK
Junior Member
44
08-28-2017, 01:28 PM
#9
It is safeguarded by a surge protector, often found in power strips.
K
KupesanDDK
08-28-2017, 01:28 PM #9

It is safeguarded by a surge protector, often found in power strips.

F
FriedAss
Junior Member
4
08-28-2017, 02:04 PM
#10
oh yes , it is connected to a power extension with a fuse , so it probably has some protection.
F
FriedAss
08-28-2017, 02:04 PM #10

oh yes , it is connected to a power extension with a fuse , so it probably has some protection.