F5F Stay Refreshed Hardware Desktop PC stopped working and I checked the PSU/MB swap.

PC stopped working and I checked the PSU/MB swap.

PC stopped working and I checked the PSU/MB swap.

L
LionDanger141
Junior Member
18
02-27-2020, 04:54 AM
#1
Uncertain about the issue but the PC functioned normally the previous day. Yesterday I changed the memory and only the LED lights activated. Pressing the power button didn't make a difference. I've also swapped back to the original memory, but the same problem persists. What I attempted? • 2 MB - PRIME B550 PLUS (operated yesterday) and B550 ROG STRIX GAMING • Used two different PSUs • Cleared CMOS • Reconnected front panel cables multiple times • Switched power switch from another chassis • Removed GPU/Ram • Disconnected all non-essential cables
L
LionDanger141
02-27-2020, 04:54 AM #1

Uncertain about the issue but the PC functioned normally the previous day. Yesterday I changed the memory and only the LED lights activated. Pressing the power button didn't make a difference. I've also swapped back to the original memory, but the same problem persists. What I attempted? • 2 MB - PRIME B550 PLUS (operated yesterday) and B550 ROG STRIX GAMING • Used two different PSUs • Cleared CMOS • Reconnected front panel cables multiple times • Switched power switch from another chassis • Removed GPU/Ram • Disconnected all non-essential cables

A
AXDeadXMidget
Member
55
03-04-2020, 09:47 AM
#2
What other components are installed? Do you have a 5000 series processor, and is there a need to update the BIOS because the LED indicators are activating? We require additional details.
A
AXDeadXMidget
03-04-2020, 09:47 AM #2

What other components are installed? Do you have a 5000 series processor, and is there a need to update the BIOS because the LED indicators are activating? We require additional details.

G
GewoonMex
Member
88
03-05-2020, 07:04 AM
#3
I have a Ryzen 5600x processor, Corsair Vengeance 2x16GB RAM at 3600MHz, and an RTX 3060 graphics card with 12GB VRAM running at 850W. The system was functioning properly yesterday when the first MB connected, but only the RGB LED is active—no other components are working. There’s no sound, no fans spinning, and pressing the power button doesn’t trigger anything. No LED lights are visible either.
G
GewoonMex
03-05-2020, 07:04 AM #3

I have a Ryzen 5600x processor, Corsair Vengeance 2x16GB RAM at 3600MHz, and an RTX 3060 graphics card with 12GB VRAM running at 850W. The system was functioning properly yesterday when the first MB connected, but only the RGB LED is active—no other components are working. There’s no sound, no fans spinning, and pressing the power button doesn’t trigger anything. No LED lights are visible either.

M
MrBibboCraft
Junior Member
21
03-19-2020, 10:57 AM
#4
The memory jump didn't function.
M
MrBibboCraft
03-19-2020, 10:57 AM #4

The memory jump didn't function.

S
Shadowsuns
Member
228
03-20-2020, 07:23 PM
#5
Identified the issue. A bent pin on the CPU was the cause.
S
Shadowsuns
03-20-2020, 07:23 PM #5

Identified the issue. A bent pin on the CPU was the cause.