F5F Stay Refreshed Hardware Desktop PC setup issue persists despite MSI MEG X870E installation. System runs smoothly on AMD Ryzen 9 9950X3D.

PC setup issue persists despite MSI MEG X870E installation. System runs smoothly on AMD Ryzen 9 9950X3D.

PC setup issue persists despite MSI MEG X870E installation. System runs smoothly on AMD Ryzen 9 9950X3D.

A
AdamPlayzxXMc
Member
52
05-14-2023, 03:36 AM
#1
Hello everyone, I completed the build and when I power on the PC it doesn't function properly. The video from booting shows the changes I made—switched RAM to a kit from MSI. Before starting, I pressed the CMOS reset button for about ten seconds on the back. Details: motherboard model MSIM MEG X870E, CPU AMD Ryzen 9 9940X3D, RAM F5-6000J3040G32GX2-FX5, power supply Corsair HX1500i 2025, case Cooler Master HAF 700 EVO. The issue is I don't have a spare CPU to rule it out. What could be causing the problem based on the codes?
A
AdamPlayzxXMc
05-14-2023, 03:36 AM #1

Hello everyone, I completed the build and when I power on the PC it doesn't function properly. The video from booting shows the changes I made—switched RAM to a kit from MSI. Before starting, I pressed the CMOS reset button for about ten seconds on the back. Details: motherboard model MSIM MEG X870E, CPU AMD Ryzen 9 9940X3D, RAM F5-6000J3040G32GX2-FX5, power supply Corsair HX1500i 2025, case Cooler Master HAF 700 EVO. The issue is I don't have a spare CPU to rule it out. What could be causing the problem based on the codes?

R
renliff
Member
240
05-20-2023, 06:12 AM
#2
Some of these codes relate to poor drivers or disabled devices, possibly due to a faulty BIOS. It’s probable they’re triggered by a possible bad BIOS issue. Consider updating the latest BIOS from USB, reseating all parts, and attempting a boot.
R
renliff
05-20-2023, 06:12 AM #2

Some of these codes relate to poor drivers or disabled devices, possibly due to a faulty BIOS. It’s probable they’re triggered by a possible bad BIOS issue. Consider updating the latest BIOS from USB, reseating all parts, and attempting a boot.

L
LegendaryPrimx
Junior Member
17
05-20-2023, 02:15 PM
#3
@Emperor Storky Which BIOS version are you running? You must use at least version 7E48v1A27 (released 25 March 2025) to support the 9950X3D CPU. This can be achieved by pressing the "BIOS flashback" button on the rear I/O panel while the system is connected via USB. Refer to page 89 of your manual for detailed steps.
L
LegendaryPrimx
05-20-2023, 02:15 PM #3

@Emperor Storky Which BIOS version are you running? You must use at least version 7E48v1A27 (released 25 March 2025) to support the 9950X3D CPU. This can be achieved by pressing the "BIOS flashback" button on the rear I/O panel while the system is connected via USB. Refer to page 89 of your manual for detailed steps.

C
chloJ
Member
237
05-20-2023, 02:42 PM
#4
The duration for memory training is being clarified, and I checked if the BIOS was updated.
C
chloJ
05-20-2023, 02:42 PM #4

The duration for memory training is being clarified, and I checked if the BIOS was updated.

T
Taybaybay
Posting Freak
850
05-24-2023, 05:54 AM
#5
I possess the newest release from April; I can re-download it and attempt another update. Since I didn’t have a USB stick, I used a microSD card in a reader for the update—could that lead to complications? I noticed the process completed and restarted after the update. Prior to any changes, I observed the warning about CPU/RAM to ensure the correct BIOS was already installed.
T
Taybaybay
05-24-2023, 05:54 AM #5

I possess the newest release from April; I can re-download it and attempt another update. Since I didn’t have a USB stick, I used a microSD card in a reader for the update—could that lead to complications? I noticed the process completed and restarted after the update. Prior to any changes, I observed the warning about CPU/RAM to ensure the correct BIOS was already installed.

L
lizzard89
Senior Member
707
05-24-2023, 07:54 AM
#6
I only saw the boot error message.
L
lizzard89
05-24-2023, 07:54 AM #6

I only saw the boot error message.

O
OverlordCoby
Member
169
05-24-2023, 03:04 PM
#7
It seems to function now. I need to insert my 2080 Ti to check if it transmits video, and I think the visuals are looking good.
O
OverlordCoby
05-24-2023, 03:04 PM #7

It seems to function now. I need to insert my 2080 Ti to check if it transmits video, and I think the visuals are looking good.

M
MannINMJ
Member
105
05-24-2023, 11:55 PM
#8
Great to hear it’s working! Please let me know if everything runs smoothly or if you encounter any further issues!
M
MannINMJ
05-24-2023, 11:55 PM #8

Great to hear it’s working! Please let me know if everything runs smoothly or if you encounter any further issues!

S
Slimy_Prophet
Member
58
05-25-2023, 04:27 AM
#9
This weekend I plan to swap out the GPU from my old PC for a new one, hoping it resolves any problems.
S
Slimy_Prophet
05-25-2023, 04:27 AM #9

This weekend I plan to swap out the GPU from my old PC for a new one, hoping it resolves any problems.

R
rudfoK
Junior Member
2
05-25-2023, 06:27 AM
#10
It looks like you're expressing enthusiasm! Hope everything goes well for you.
R
rudfoK
05-25-2023, 06:27 AM #10

It looks like you're expressing enthusiasm! Hope everything goes well for you.