PC overclocking fails to start up.

F5F Stay Refreshed Hardware Desktop PC overclocking fails to start up.

PC overclocking fails to start up.

PC overclocking fails to start up.

I

ImperateAlan
Member

50

01-03-2018, 01:42 AM

#1

Hey everyone, I faced an issue after overclocking my Ryzen 5 2600 to 3.9GHz at around 1.3V. When I restarted the PC, it didn’t display the post-screen and restarted after about 15 seconds. I tried removing the battery for a while but didn’t see any improvement. Also, I shorted the CLR CMOS pins with a screwdriver, but still nothing. My specs are: CPU Amd Ryzen 5 2600, motherboard ASRock B450M Pro, 4GB PSU, Corsair CX 650 GPU, 6GB RAM Corsair LX16 at 3000MHz CL.

I

ImperateAlan

01-03-2018, 01:42 AM #1

Hey everyone, I faced an issue after overclocking my Ryzen 5 2600 to 3.9GHz at around 1.3V. When I restarted the PC, it didn’t display the post-screen and restarted after about 15 seconds. I tried removing the battery for a while but didn’t see any improvement. Also, I shorted the CLR CMOS pins with a screwdriver, but still nothing. My specs are: CPU Amd Ryzen 5 2600, motherboard ASRock B450M Pro, 4GB PSU, Corsair CX 650 GPU, 6GB RAM Corsair LX16 at 3000MHz CL.

R

Raqet
Member

222

01-03-2018, 11:57 PM

#2

Did you consider the LLC structure you chose?

R

Raqet

01-03-2018, 11:57 PM #2

Did you consider the LLC structure you chose?

_

_Geqr_
Senior Member

554

01-05-2018, 09:43 AM

#3

Not sure what you mean?

_

_Geqr_

01-05-2018, 09:43 AM #3

Not sure what you mean?

D

DrBrokenBones
Senior Member

378

01-17-2018, 06:35 AM

#4

Well then we have a problem. You might've fried your CPU with high voltage. Didn't you look at Bios settings change when pressing F10? It shows you all the changes that were made before letting you apply them.

D

DrBrokenBones

01-17-2018, 06:35 AM #4

Well then we have a problem. You might've fried your CPU with high voltage. Didn't you look at Bios settings change when pressing F10? It shows you all the changes that were made before letting you apply them.

M

mjminer469
Member

159

01-21-2018, 10:05 PM

#5

I didn't notice the LLC setting during the overclocking process

M

mjminer469

01-21-2018, 10:05 PM #5

I didn't notice the LLC setting during the overclocking process

M

MasterCed
Member

65

01-21-2018, 11:37 PM

#6

I haven't encountered an LLC option in the Asrock B450 Pro4. My system uses a standard-sized board, though many BIOS choices remain consistent.

M

MasterCed

01-21-2018, 11:37 PM #6

I haven't encountered an LLC option in the Asrock B450 Pro4. My system uses a standard-sized board, though many BIOS choices remain consistent.

D

DeGekkeTijger
Member

110

01-28-2018, 04:01 AM

#7

No, I didn't mention unplugging the PSU during the battery removal process.

D

DeGekkeTijger

01-28-2018, 04:01 AM #7

No, I didn't mention unplugging the PSU during the battery removal process.

P

ProTimmy
Member

123

01-28-2018, 05:24 AM

#8

Also tested with on PSU

P

ProTimmy

01-28-2018, 05:24 AM #8

Also tested with on PSU