F5F Stay Refreshed Hardware Desktop PC issue with an unusual fix?

PC issue with an unusual fix?

PC issue with an unusual fix?

F
FlameSquid32
Senior Member
501
07-22-2016, 12:48 AM
#1
I’m facing a problem with my PC freezing on the TUF gaming logo when I first turn it on. At first, I tried various solutions like resetting the CMOS battery and everything else possible. Then I removed the back panel, replaced it, and it worked immediately. I was unsure if this was a coincidence or something more. Now it’s happened over 50 times, and most of the time fixing the case panel resolves it, though it doesn’t always. I’m wondering if there’s another factor involved. Any suggestions?
F
FlameSquid32
07-22-2016, 12:48 AM #1

I’m facing a problem with my PC freezing on the TUF gaming logo when I first turn it on. At first, I tried various solutions like resetting the CMOS battery and everything else possible. Then I removed the back panel, replaced it, and it worked immediately. I was unsure if this was a coincidence or something more. Now it’s happened over 50 times, and most of the time fixing the case panel resolves it, though it doesn’t always. I’m wondering if there’s another factor involved. Any suggestions?

K
KoDa74100
Member
64
07-22-2016, 01:56 AM
#2
There is no chance of pure luck when dealing with electronics and PC hardware. There must be a reason behind it, likely related to a weak connection caused by poor cable management or stress on wires from the case panel. It could also be due to a short circuit, such as a clipped or exposed wire touching the case panel.

If you completely remove the panel, verify that all 8 pin EPS/CPU connectors are securely plugged into the motherboard at the top. Even if they appear fully connected, wiring must pass through the motherboard tray, so a loose connection in the side panel is possible. Also, ensure the ATX cable is properly attached and reinserted, making sure it’s fully seated. Gently shaking the panel can help confirm everything is positioned correctly.
K
KoDa74100
07-22-2016, 01:56 AM #2

There is no chance of pure luck when dealing with electronics and PC hardware. There must be a reason behind it, likely related to a weak connection caused by poor cable management or stress on wires from the case panel. It could also be due to a short circuit, such as a clipped or exposed wire touching the case panel.

If you completely remove the panel, verify that all 8 pin EPS/CPU connectors are securely plugged into the motherboard at the top. Even if they appear fully connected, wiring must pass through the motherboard tray, so a loose connection in the side panel is possible. Also, ensure the ATX cable is properly attached and reinserted, making sure it’s fully seated. Gently shaking the panel can help confirm everything is positioned correctly.

C
creepereaterz
Member
73
07-22-2016, 05:21 AM
#3
Thanks for the advice. The problem keeps happening even when the back panel is removed, which suggests a possible issue with the cables. I’ll re-examine them carefully. Honestly, my cable organization, especially near the motherboard, isn’t ideal, so I’ll take a closer look.
C
creepereaterz
07-22-2016, 05:21 AM #3

Thanks for the advice. The problem keeps happening even when the back panel is removed, which suggests a possible issue with the cables. I’ll re-examine them carefully. Honestly, my cable organization, especially near the motherboard, isn’t ideal, so I’ll take a closer look.