F5F Stay Refreshed Hardware Desktop PC Flipping breaker

PC Flipping breaker

PC Flipping breaker

Pages (2): 1 2 Next
D
Devin_Man1011
Junior Member
28
10-23-2023, 09:26 AM
#1
Hi everyone, I've reviewed a few similar cases but thought it might still be worth checking in with you.
D
Devin_Man1011
10-23-2023, 09:26 AM #1

Hi everyone, I've reviewed a few similar cases but thought it might still be worth checking in with you.

T
Tijeyd
Member
189
10-24-2023, 06:08 PM
#2
Hire an electrician to check the circuit. I think there might be a faulty breaker, which is typical. Another possibility could involve the wiring itself.
T
Tijeyd
10-24-2023, 06:08 PM #2

Hire an electrician to check the circuit. I think there might be a faulty breaker, which is typical. Another possibility could involve the wiring itself.

B
BooyaLuver19
Member
77
10-29-2023, 05:49 PM
#3
You're likely correct :/ I immediately thought about the cost of the breaker and then my thoughts went elsewhere.
B
BooyaLuver19
10-29-2023, 05:49 PM #3

You're likely correct :/ I immediately thought about the cost of the breaker and then my thoughts went elsewhere.

T
TheDark245
Member
125
10-29-2023, 07:24 PM
#4
I would switch off the breaker and move around with a lamp and plug into outlets to check for additional connections on that circuit.
Then I would examine everything plugged into your room, as a hair dryer typically draws about 1500 watts at full power and a portable heater is also quite energy-intensive.
What is the make and model of the power panel? You don’t need an arc fault breaker unless there’s a sink in your room.
Examining the breaker you mentioned, you should only require this product: https://www.canadabreakers.ca/products/b...s=20&_ss=c
To make a change, turn off the power to your house by flipping the main breaker on the panel. Remove the cover from the power panel and unscrew the breaker from it. Do not attempt to take it out while the panel is powered. Because these breakers are installed directly into the buss bar, you risk getting shocked.
T
TheDark245
10-29-2023, 07:24 PM #4

I would switch off the breaker and move around with a lamp and plug into outlets to check for additional connections on that circuit.
Then I would examine everything plugged into your room, as a hair dryer typically draws about 1500 watts at full power and a portable heater is also quite energy-intensive.
What is the make and model of the power panel? You don’t need an arc fault breaker unless there’s a sink in your room.
Examining the breaker you mentioned, you should only require this product: https://www.canadabreakers.ca/products/b...s=20&_ss=c
To make a change, turn off the power to your house by flipping the main breaker on the panel. Remove the cover from the power panel and unscrew the breaker from it. Do not attempt to take it out while the panel is powered. Because these breakers are installed directly into the buss bar, you risk getting shocked.

R
rohan2303
Junior Member
10
10-31-2023, 10:42 AM
#5
There should be some activity with Canadian electrical hardware....
If the circuit isn't already a ground fault interrupt (GFI), you won't need to buy a breaker with that function unless it meets the code or local requirements.
A standard 15A breaker costs around $7 at Home Depot.
R
rohan2303
10-31-2023, 10:42 AM #5

There should be some activity with Canadian electrical hardware....
If the circuit isn't already a ground fault interrupt (GFI), you won't need to buy a breaker with that function unless it meets the code or local requirements.
A standard 15A breaker costs around $7 at Home Depot.

T
tobygamer123
Member
62
10-31-2023, 12:11 PM
#6
Regarding the remarks from @faalin, if you're not an electrician or not very experienced with home wiring, it's advisable to hire someone who does. Experimenting with a breaker panel can be a fun way for friends and family to help you, but it's best to have proper expertise involved.
T
tobygamer123
10-31-2023, 12:11 PM #6

Regarding the remarks from @faalin, if you're not an electrician or not very experienced with home wiring, it's advisable to hire someone who does. Experimenting with a breaker panel can be a fun way for friends and family to help you, but it's best to have proper expertise involved.

S
squirreler1023
Junior Member
23
10-31-2023, 03:21 PM
#7
find one of those and check your outlet wiring
S
squirreler1023
10-31-2023, 03:21 PM #7

find one of those and check your outlet wiring

G
gialpha
Junior Member
43
11-04-2023, 03:48 PM
#8
Seconding
@punkncat
on all counts.
Hire a licensed electrician.
Someone with the right qualifications who understands local electrical codes, troubleshooting techniques, and replacement options is essential. They should also have the expertise to handle such tasks properly.
If an unqualified person performs the work, you might find out that your homeowner's insurance won't cover it.
G
gialpha
11-04-2023, 03:48 PM #8

Seconding
@punkncat
on all counts.
Hire a licensed electrician.
Someone with the right qualifications who understands local electrical codes, troubleshooting techniques, and replacement options is essential. They should also have the expertise to handle such tasks properly.
If an unqualified person performs the work, you might find out that your homeowner's insurance won't cover it.

G
goephi
Member
210
11-05-2023, 12:37 AM
#9
I will also concur with the above - Obtain an electrician.
G
goephi
11-05-2023, 12:37 AM #9

I will also concur with the above - Obtain an electrician.

M
Metton_EX
Junior Member
41
11-05-2023, 01:13 AM
#10
That is the exact breaker that is there now for my room. There is no sink in my room lol. It is the only breaker of that kind on the panel.
Edit: Also there are no other outlets on this circuit, I went around and checked.
M
Metton_EX
11-05-2023, 01:13 AM #10

That is the exact breaker that is there now for my room. There is no sink in my room lol. It is the only breaker of that kind on the panel.
Edit: Also there are no other outlets on this circuit, I went around and checked.

Pages (2): 1 2 Next