F5F Stay Refreshed Hardware Desktop PC fails to start in BIOS or doesn’t boot after turning on Secure Boot.

PC fails to start in BIOS or doesn’t boot after turning on Secure Boot.

PC fails to start in BIOS or doesn’t boot after turning on Secure Boot.

Pages (3): Previous 1 2 3 Next
C
ChromeMC
Junior Member
24
01-28-2021, 05:26 PM
#11
Disconnect the drives, try accessing BIOS again. Your partitions might be set up as MBR. If you can reach BIOS, revert the changes. Once back in Windows, use utilities to change MBR to GPT. Secure Boot needs UEFI mode enabled. https://docs.microsoft.com/en-us/windows...mbr-to-gpt
C
ChromeMC
01-28-2021, 05:26 PM #11

Disconnect the drives, try accessing BIOS again. Your partitions might be set up as MBR. If you can reach BIOS, revert the changes. Once back in Windows, use utilities to change MBR to GPT. Secure Boot needs UEFI mode enabled. https://docs.microsoft.com/en-us/windows...mbr-to-gpt

D
Dialatz
Member
187
02-03-2021, 06:27 AM
#12
Are you referring to drives such as SSD and HDD? The screen remains black even after unplugging them. You might attempt to transfer it to another PC, which could allow booting. Updated October 7, 2021 by Esketit
D
Dialatz
02-03-2021, 06:27 AM #12

Are you referring to drives such as SSD and HDD? The screen remains black even after unplugging them. You might attempt to transfer it to another PC, which could allow booting. Updated October 7, 2021 by Esketit

F
Fabista
Member
175
02-03-2021, 03:30 PM
#13
Are there any other GPUs nearby?
F
Fabista
02-03-2021, 03:30 PM #13

Are there any other GPUs nearby?

X
xTripleMinerx
Posting Freak
846
02-09-2021, 11:10 AM
#14
Unfortunately, I only have one GPU.
X
xTripleMinerx
02-09-2021, 11:10 AM #14

Unfortunately, I only have one GPU.

B
blockbuster87
Junior Member
11
02-14-2021, 03:21 AM
#15
Attempt to connect the GPU, insert HDMI into Mobo even without an APU. Let it idle with a black screen; this might reset the secure boot key or hardware recognition. I’ve heard it helps in some cases. Once it’s running, reinsert the GPU and see if the signal appears.
B
blockbuster87
02-14-2021, 03:21 AM #15

Attempt to connect the GPU, insert HDMI into Mobo even without an APU. Let it idle with a black screen; this might reset the secure boot key or hardware recognition. I’ve heard it helps in some cases. Once it’s running, reinsert the GPU and see if the signal appears.

D
D_gamer_
Junior Member
6
02-16-2021, 02:00 PM
#16
Sure, I can give it a shot. I'll let you know in a few hours how it went.
D
D_gamer_
02-16-2021, 02:00 PM #16

Sure, I can give it a shot. I'll let you know in a few hours how it went.

T
TheGr8Villager
Junior Member
41
02-22-2021, 03:46 AM
#17
Failed, I'll use GT 730 on Monday instead.
T
TheGr8Villager
02-22-2021, 03:46 AM #17

Failed, I'll use GT 730 on Monday instead.

A
agroman
Junior Member
45
02-22-2021, 05:28 AM
#18
I'm facing the same problem on the same motherboard, and it's really frustrating. The PC is almost unusable until we figure something out.
A
agroman
02-22-2021, 05:28 AM #18

I'm facing the same problem on the same motherboard, and it's really frustrating. The PC is almost unusable until we figure something out.

M
melpanda
Member
176
02-22-2021, 12:46 PM
#19
Have you experimented with another GPU? I'll test the older one on Monday and let you know the outcome.
M
melpanda
02-22-2021, 12:46 PM #19

Have you experimented with another GPU? I'll test the older one on Monday and let you know the outcome.

M
mikeltxi1
Member
190
02-22-2021, 01:35 PM
#20
i have the same issue happened just today. I ve tries everything mentioned in this thread. I have tried using a working gtx1050 but with no success, still no signal on monitor. Will this be covered by warranty?
M
mikeltxi1
02-22-2021, 01:35 PM #20

i have the same issue happened just today. I ve tries everything mentioned in this thread. I have tried using a working gtx1050 but with no success, still no signal on monitor. Will this be covered by warranty?

Pages (3): Previous 1 2 3 Next