F5F Stay Refreshed Hardware Desktop PC 3 emits a beep once it switches to the air cooler from the AIO model.

PC 3 emits a beep once it switches to the air cooler from the AIO model.

PC 3 emits a beep once it switches to the air cooler from the AIO model.

D
Demonsss91
Posting Freak
767
02-13-2019, 03:51 PM
#1
Hello, your PC is experiencing memory issues when you swap the slots, even though everything functions perfectly before. The error occurs with specific memory configurations—like swapping slot A2 for B2 and vice versa. It triggers a beep code 3 and displays CPU/Dram debug messages. Resetting the slots restores normal operation. Your system uses a TridentZ RGB 8x2 3600 kit with a Ryzen processor. The memory settings are likely stored in the BIOS/UEFI rather than directly inside the chip itself.
D
Demonsss91
02-13-2019, 03:51 PM #1

Hello, your PC is experiencing memory issues when you swap the slots, even though everything functions perfectly before. The error occurs with specific memory configurations—like swapping slot A2 for B2 and vice versa. It triggers a beep code 3 and displays CPU/Dram debug messages. Resetting the slots restores normal operation. Your system uses a TridentZ RGB 8x2 3600 kit with a Ryzen processor. The memory settings are likely stored in the BIOS/UEFI rather than directly inside the chip itself.

S
SergioPW
Member
206
02-16-2019, 08:57 AM
#2
Reversing the order of parts affects the CMOS reset process. The SPD chip on every memory card may be causing the CPU to react abnormally, as it expects a certain pattern like 10001 but receives 20002 when the cards are swapped.
S
SergioPW
02-16-2019, 08:57 AM #2

Reversing the order of parts affects the CMOS reset process. The SPD chip on every memory card may be causing the CPU to react abnormally, as it expects a certain pattern like 10001 but receives 20002 when the cards are swapped.

S
Selini
Member
161
02-16-2019, 04:46 PM
#3
Perhaps the issue began resolving after switching back to the original settings.
S
Selini
02-16-2019, 04:46 PM #3

Perhaps the issue began resolving after switching back to the original settings.

R
Radec92
Junior Member
39
02-17-2019, 01:44 AM
#4
Probably.
R
Radec92
02-17-2019, 01:44 AM #4

Probably.