paste thermal inside AM4 connector
paste thermal inside AM4 connector
I believe while taking out the CPU, a bit of thermal paste was applied to the socket. I reinserted the CPU and it functioned properly. Using MX4 ensures it doesn’t conduct electricity. What might happen? I imagine higher resistance at that pin leading to more heat, though I’m not an expert. Also, cleaning it is nearly impossible because the socket has deep holes.
Contact cleaner can remove it easily. Just spray it well and it should come off. You can locate it at stores such as O'Reiley or Autozone. I’ve even cleaned my boards in the dishwasher with hot water, but you need to understand the process and ensure the board remains functional afterward. The key is proper drying time—this is the most important part of washing a board. Once you have the cleaner, apply it and it should work. If not, let me know and I’ll guide you through using a dishwasher.
If you know how it's not a problem. The washer itself won't hurt the board, it's what you do after that matters. There is a procedure to follow doing that but it works. I've cleaned several boards that way including the ones I run with Ln2 to clean the insulating dielectric grease off (Out of the socket and surrounding areas) and after doing it the way I do they've always worked fine afterwards - Right back to doing some crazy clocks like nothing ever happened.
basically just placing it in plain water without soap is okay. Just make sure it’s not left too long or you might damage it.
In most situations you should add a bit more than usual but I've tried it too. The dishwasher is ideal for removing tough stains from difficult-to-clean areas, but you need hot water—specifically HOT. Perform a hot wash followed by rinsing for optimal outcomes. The remaining steps concern drying, which is time-consuming but effective. Don't rely on the washer to dry it itself; it doesn’t have a drying cycle and must be handled through other methods over an extended period.
Sure, just make sure it dries quickly after washing—it shouldn’t become an issue. You don’t want this becoming a regular task; only do it when necessary. I’m confident daily washing would prevent oxidation buildup, which is why I recommend doing it only as needed. A thorough rinse with a cleaning spray before drying usually helps too.