F5F Stay Refreshed Hardware Desktop

Pages (2): 1 2 Next
N
NinoFY
Member
164
08-04-2023, 11:20 AM
#1
I’m just starting out and not sure if I should adjust my CPU voltage down to 0.075 or 0.100, or set it to 1.4. My 14900k tends to run a bit high at idle with 1.4-1.5v, and someone suggested adaptive settings around 1.4. Your experience shows good performance at lower voltages (120-130fps in Cyberpunk) but only 90fps when using normal settings. The advice would be really helpful, especially since you’re new to this stuff. Thanks!
N
NinoFY
08-04-2023, 11:20 AM #1

I’m just starting out and not sure if I should adjust my CPU voltage down to 0.075 or 0.100, or set it to 1.4. My 14900k tends to run a bit high at idle with 1.4-1.5v, and someone suggested adaptive settings around 1.4. Your experience shows good performance at lower voltages (120-130fps in Cyberpunk) but only 90fps when using normal settings. The advice would be really helpful, especially since you’re new to this stuff. Thanks!

A
Aerovoltz
Junior Member
3
08-18-2023, 09:25 PM
#2
which motherboard ?
A
Aerovoltz
08-18-2023, 09:25 PM #2

which motherboard ?

C
Christina3656
Member
124
08-19-2023, 01:23 AM
#3
MSI configurations seem reasonable.
C
Christina3656
08-19-2023, 01:23 AM #3

MSI configurations seem reasonable.

K
KlayDog1
Senior Member
685
08-19-2023, 08:46 AM
#4
It also mentions in the photo that I don’t have the adaptive 1.4 version which I do
K
KlayDog1
08-19-2023, 08:46 AM #4

It also mentions in the photo that I don’t have the adaptive 1.4 version which I do

C
cal_9
Junior Member
29
08-23-2023, 07:43 AM
#5
Mode 7, proceed gently until instability appears, then adjust incrementally.
C
cal_9
08-23-2023, 07:43 AM #5

Mode 7, proceed gently until instability appears, then adjust incrementally.

X
xHuntex
Member
203
08-30-2023, 01:41 PM
#6
I'm curious about the topic you're discussing. Are you referring to CPU Lite Load mode? I use that setting to lower the voltage of my 12400 on an MSI motherboard. I adjust it from 18 to 11. Updated July 22, 2025 by leclod
X
xHuntex
08-30-2023, 01:41 PM #6

I'm curious about the topic you're discussing. Are you referring to CPU Lite Load mode? I use that setting to lower the voltage of my 12400 on an MSI motherboard. I adjust it from 18 to 11. Updated July 22, 2025 by leclod

A
AUDanteh
Junior Member
8
09-07-2023, 02:49 AM
#7
I believe the default is 9, but I adjusted it to 4.
A
AUDanteh
09-07-2023, 02:49 AM #7

I believe the default is 9, but I adjusted it to 4.

B
baldebal207
Member
138
09-10-2023, 08:18 AM
#8
You're asking about the "msi like mode." Can you clarify what you mean?
B
baldebal207
09-10-2023, 08:18 AM #8

You're asking about the "msi like mode." Can you clarify what you mean?

B
BigDaddy012
Member
57
09-11-2023, 09:45 AM
#9
Yeah lite auto corrects a biatch
B
BigDaddy012
09-11-2023, 09:45 AM #9

Yeah lite auto corrects a biatch

R
Red_impulse
Junior Member
46
09-11-2023, 11:02 AM
#10
It's CPU Lite Load mode, which is more typical for MSI than Intel. I think your settings are off. Modes 4 and 9 are likely the ones you're referring to. Your data should assist someone. Edited July 23, 2025 by leclod
R
Red_impulse
09-11-2023, 11:02 AM #10

It's CPU Lite Load mode, which is more typical for MSI than Intel. I think your settings are off. Modes 4 and 9 are likely the ones you're referring to. Your data should assist someone. Edited July 23, 2025 by leclod

Pages (2): 1 2 Next