F5F Stay Refreshed Hardware Desktop Overheating CPU and PC issues are common. Check temperatures, clean dust, and ensure proper cooling.

Overheating CPU and PC issues are common. Check temperatures, clean dust, and ensure proper cooling.

Overheating CPU and PC issues are common. Check temperatures, clean dust, and ensure proper cooling.

F
213
02-02-2020, 05:53 AM
#1
Hey everyone, I've been facing some issues with my PC lately, especially when trying to play games or stream on YouTube. Recently, I upgraded my case and the specs are as follows: CPU - AMD Ryzen 5 5600X, Motherboard - MSI MAG B550M, Case - Corsair 4000xRGB. The RAM is Corsair Vengeance Pro RGB (3x8GB) and a 16GB Corsair (1x16GB). My PSU is the Corsair 750W CX750F RGB. The GPU is a NVIDIA GeForce GTX 1060 with 6GB of RAM. When I run games, the CPU temperatures stay between 45-60°C at idle and reach 80°C+ under load. I also noticed that with positive pressure in the case, launching games like COD CW works smoothly, which it did before. Since I changed both the motherboard and GPU at the same time, it functioned well for about four days. Now I'm considering switching to an AIO cooler. Any advice would be greatly appreciated! Edited February 7, 2023 by King140002
F
FrankieNicolas
02-02-2020, 05:53 AM #1

Hey everyone, I've been facing some issues with my PC lately, especially when trying to play games or stream on YouTube. Recently, I upgraded my case and the specs are as follows: CPU - AMD Ryzen 5 5600X, Motherboard - MSI MAG B550M, Case - Corsair 4000xRGB. The RAM is Corsair Vengeance Pro RGB (3x8GB) and a 16GB Corsair (1x16GB). My PSU is the Corsair 750W CX750F RGB. The GPU is a NVIDIA GeForce GTX 1060 with 6GB of RAM. When I run games, the CPU temperatures stay between 45-60°C at idle and reach 80°C+ under load. I also noticed that with positive pressure in the case, launching games like COD CW works smoothly, which it did before. Since I changed both the motherboard and GPU at the same time, it functioned well for about four days. Now I'm considering switching to an AIO cooler. Any advice would be greatly appreciated! Edited February 7, 2023 by King140002

B
bordbeinsvein
Member
70
02-21-2020, 07:54 AM
#2
It would have helped to know more about the situation. Could you share the CPU and GPU temperatures? You might want to check HWiNFO64 for that. Are there any unusual sounds from the cooler or fans? Make sure all PSU connections are secure and try a CMOS reset if you haven’t already.
B
bordbeinsvein
02-21-2020, 07:54 AM #2

It would have helped to know more about the situation. Could you share the CPU and GPU temperatures? You might want to check HWiNFO64 for that. Are there any unusual sounds from the cooler or fans? Make sure all PSU connections are secure and try a CMOS reset if you haven’t already.

R
R3kty
Member
133
02-22-2020, 12:13 PM
#3
Consider reapplying the thermal paste. Is it warm around you? The existing cooler should suffice.
R
R3kty
02-22-2020, 12:13 PM #3

Consider reapplying the thermal paste. Is it warm around you? The existing cooler should suffice.

X
xEchoz
Member
208
02-22-2020, 01:04 PM
#4
Hi, I've experienced this three times after switching to the new hardware (23 days ago). The room maintains a temperature of 27°C at its maximum.
X
xEchoz
02-22-2020, 01:04 PM #4

Hi, I've experienced this three times after switching to the new hardware (23 days ago). The room maintains a temperature of 27°C at its maximum.

S
Stuji27
Junior Member
42
02-23-2020, 12:41 PM
#5
Hey, you're welcome! (Just a quick note—this was a bit of a learning curve!) The update shows CPU temps between 45-60°C, GPU at around 80°C+, and the GTX 1060 runs at 47-55°C while I test games.
S
Stuji27
02-23-2020, 12:41 PM #5

Hey, you're welcome! (Just a quick note—this was a bit of a learning curve!) The update shows CPU temps between 45-60°C, GPU at around 80°C+, and the GTX 1060 runs at 47-55°C while I test games.

B
Bustors
Junior Member
9
02-23-2020, 03:54 PM
#6
It doesn't seem suitable for the stock cooler's temperatures, particularly if your fan curve is set for quiet performance. Consider adjusting those settings.
B
Bustors
02-23-2020, 03:54 PM #6

It doesn't seem suitable for the stock cooler's temperatures, particularly if your fan curve is set for quiet performance. Consider adjusting those settings.

P
phizphi
Junior Member
18
02-25-2020, 06:12 AM
#7
I took a close look and made the necessary changes. All settings are now at maximum speed (1500RPM on the QL120), and temperatures remain consistent before. I also verified the fan direction.
P
phizphi
02-25-2020, 06:12 AM #7

I took a close look and made the necessary changes. All settings are now at maximum speed (1500RPM on the QL120), and temperatures remain consistent before. I also verified the fan direction.