F5F Stay Refreshed Hardware Desktop Overclocking status for DDR5 voltage PMIC configuration

Overclocking status for DDR5 voltage PMIC configuration

Overclocking status for DDR5 voltage PMIC configuration

T
TheBigET
Junior Member
32
11-23-2021, 02:46 AM
#1
Ok um so gosh there's alot of information out there but like not at the same time. Like there is but not alot on the specifics of overclocking if PMIC is locked or unlocked, also not much info on the three "bios modes" (for lack of better term) and what each mode allows you to do, I believe the lowest mode doesn't let you overvolt at all, and the second does but only to 1.435, and the third is totally unlocked to overvolt to your hearts content, but I believe I read but idk that your mobo is programmed with only one of those modes? And so also on the third mode and oc for forever bios mode, does that let you do that even if your PMIC is locked?, or if PMIC is locked, the with whatever of the three modes you motherboard shipped with then negated and do nothing? There are alot of caveats I see, or it's much simpler than all the info that's out there makes it out to be. So can someone or someone-s, please if knowledgeable about this, can you please lend their knowledge and teach meeeeeeeee, because all info out there, well the very little that there is, makes my mind go in circles because they don't really get into well all the questions I asked, so their info/articles are like whAaaAaATttTt? So if you are knowledgeable in this area of computing, please please and thank you share your knowledge so I no longer will be a memory peasent, Thank You againnn
T
TheBigET
11-23-2021, 02:46 AM #1

Ok um so gosh there's alot of information out there but like not at the same time. Like there is but not alot on the specifics of overclocking if PMIC is locked or unlocked, also not much info on the three "bios modes" (for lack of better term) and what each mode allows you to do, I believe the lowest mode doesn't let you overvolt at all, and the second does but only to 1.435, and the third is totally unlocked to overvolt to your hearts content, but I believe I read but idk that your mobo is programmed with only one of those modes? And so also on the third mode and oc for forever bios mode, does that let you do that even if your PMIC is locked?, or if PMIC is locked, the with whatever of the three modes you motherboard shipped with then negated and do nothing? There are alot of caveats I see, or it's much simpler than all the info that's out there makes it out to be. So can someone or someone-s, please if knowledgeable about this, can you please lend their knowledge and teach meeeeeeeee, because all info out there, well the very little that there is, makes my mind go in circles because they don't really get into well all the questions I asked, so their info/articles are like whAaaAaATttTt? So if you are knowledgeable in this area of computing, please please and thank you share your knowledge so I no longer will be a memory peasent, Thank You againnn

Z
Zexer_
Member
159
11-24-2021, 02:24 PM
#2
I'm testing different configurations but currently getting the best results with 5000MHz from a 5600MHz grade. For voltages above 1.435V, I'm using Ai Tweaker and enabled High DRAM voltage mode.
Z
Zexer_
11-24-2021, 02:24 PM #2

I'm testing different configurations but currently getting the best results with 5000MHz from a 5600MHz grade. For voltages above 1.435V, I'm using Ai Tweaker and enabled High DRAM voltage mode.