F5F Stay Refreshed Power Users Overclocking overclocking scrub i7 7700k 5gHz @1.3v stable thus far

overclocking scrub i7 7700k 5gHz @1.3v stable thus far

overclocking scrub i7 7700k 5gHz @1.3v stable thus far

S
shayt2005
Junior Member
40
07-31-2017, 10:55 AM
#1
I'm just starting out with overclocking and it looks like many people struggle to reach 5 GHz. Or am I mistaken? I usually hit around 1.3 GHz, but I see others achieving up to 5 GHz at about 1.375V max.
About to try 5.1 GHz—what voltage should I set for testing?
I'll be actively participating in this discussion.
S
shayt2005
07-31-2017, 10:55 AM #1

I'm just starting out with overclocking and it looks like many people struggle to reach 5 GHz. Or am I mistaken? I usually hit around 1.3 GHz, but I see others achieving up to 5 GHz at about 1.375V max.
About to try 5.1 GHz—what voltage should I set for testing?
I'll be actively participating in this discussion.

K
KiNG_R3X
Member
185
08-10-2017, 07:45 AM
#2
It looked like the system was stable at 5.1 GHz with temperatures averaging just under 80°C, occasionally reaching up to 94°C. That’s typical for a 7700k model, so it’s okay. You shouldn’t exceed 5 GHz because your temps are already too high for continuous use—gaming performance won’t noticeably improve from a 200 MHz increase. It’s not worth it unless you’re an enthusiast; otherwise, disabling the overclock is better.
K
KiNG_R3X
08-10-2017, 07:45 AM #2

It looked like the system was stable at 5.1 GHz with temperatures averaging just under 80°C, occasionally reaching up to 94°C. That’s typical for a 7700k model, so it’s okay. You shouldn’t exceed 5 GHz because your temps are already too high for continuous use—gaming performance won’t noticeably improve from a 200 MHz increase. It’s not worth it unless you’re an enthusiast; otherwise, disabling the overclock is better.

C
CT_Kimo
Junior Member
36
08-12-2017, 01:38 AM
#3
Yeah, 1.3 to 1.4v is typical for 5GHz. Over the long term, it's better to stay below 1.35v since the chip might fail unexpectedly. I don't think people can easily reach 5GHz, but no one wants to destroy a chip just for 100-200mhz.
C
CT_Kimo
08-12-2017, 01:38 AM #3

Yeah, 1.3 to 1.4v is typical for 5GHz. Over the long term, it's better to stay below 1.35v since the chip might fail unexpectedly. I don't think people can easily reach 5GHz, but no one wants to destroy a chip just for 100-200mhz.

B
baldevlagah
Junior Member
9
09-02-2017, 07:49 PM
#4
It appeared to run at a stable 5.1 GHz with temperatures around 1.375°C on average, reaching peaks up to 94°C occasionally. That’s typical for the 7700k, so I’m sorry but I can’t test it.
B
baldevlagah
09-02-2017, 07:49 PM #4

It appeared to run at a stable 5.1 GHz with temperatures around 1.375°C on average, reaching peaks up to 94°C occasionally. That’s typical for the 7700k, so I’m sorry but I can’t test it.

S
StephanKruger
Member
226
09-09-2017, 09:26 AM
#5
Your CPU is working well. I hit 5.0ghz at 1.29v and chose to keep it that way. I rarely exceed 60c when running at full capacity after this point.
S
StephanKruger
09-09-2017, 09:26 AM #5

Your CPU is working well. I hit 5.0ghz at 1.29v and chose to keep it that way. I rarely exceed 60c when running at full capacity after this point.

B
BlooPancake
Junior Member
48
09-15-2017, 03:50 PM
#6
It looked like the system was stable at 5.1 GHz with temperatures averaging just under 80°C, occasionally reaching up to 94°C. That’s typical for a 7700k model, so it’s okay. You shouldn’t exceed 5 GHz because your temps are already too high for continuous use—gaming performance won’t noticeably improve from a 200 MHz increase. It’s not worth it unless you’re an enthusiast; otherwise, disabling the overclock is better.
B
BlooPancake
09-15-2017, 03:50 PM #6

It looked like the system was stable at 5.1 GHz with temperatures averaging just under 80°C, occasionally reaching up to 94°C. That’s typical for a 7700k model, so it’s okay. You shouldn’t exceed 5 GHz because your temps are already too high for continuous use—gaming performance won’t noticeably improve from a 200 MHz increase. It’s not worth it unless you’re an enthusiast; otherwise, disabling the overclock is better.

L
liang_hao_yan
Member
221
09-24-2017, 08:57 PM
#7
Deliding is not recommend for beginners. Getting it apart is easy with a auto delider that cost $30 but afterwards you have to apply liquid metal (properly) and reseal it. This is where you can really easily screw up. Unless you have money to burn or really have experience, do not delid it.
L
liang_hao_yan
09-24-2017, 08:57 PM #7

Deliding is not recommend for beginners. Getting it apart is easy with a auto delider that cost $30 but afterwards you have to apply liquid metal (properly) and reseal it. This is where you can really easily screw up. Unless you have money to burn or really have experience, do not delid it.