Overclocking Ryzen 5 2600 may not work as expected.

Pages (2): 1 2 Next

213

09-06-2018, 09:08 AM

In short, I actually didn’t realize it was overclocking. I switched the mode to 3.9 GHz and saved, then exited. Windows wouldn’t boot at first. After turning it off and back on, I adjusted the frequency to 3.75 GHz while gaming. Windows started repairing itself, but when I opened Chrome it crashed again. After restarting, the repair tool said something was wrong and suggested a restart. Now I’m trying to figure out what’s going on.

Saintrow9345

09-06-2018, 09:08 AM #1

FrodoW1
Junior Member

09-06-2018, 09:16 AM

Update your system to the default settings and check if it resolves the issues. Gradually implement adjustments until you identify the root cause.

FrodoW1

09-06-2018, 09:16 AM #2

Update your system to the default settings and check if it resolves the issues. Gradually implement adjustments until you identify the root cause.

Kraakka2005
Member

109

09-07-2018, 12:53 PM

It seems your CPU hits 3.725 GHz and the system freezes. What might be happening?

Kraakka2005

09-07-2018, 12:53 PM #3

It seems your CPU hits 3.725 GHz and the system freezes. What might be happening?

Sage_Deceit
Member

09-08-2018, 12:31 AM

Did you change the voltage to make it better? What adjustments are you making and how are you checking your CPU?

Sage_Deceit

09-08-2018, 12:31 AM #4

Did you change the voltage to make it better? What adjustments are you making and how are you checking your CPU?

rbesfe
Junior Member

09-28-2018, 07:14 PM

I don't understand how to adjust the voltage.

rbesfe

09-28-2018, 07:14 PM #5

I don't understand how to adjust the voltage.

ConanGhost
Member

152

09-28-2018, 08:55 PM

3.9 ghz represents the intended performance boost for the Ryzen 5 2600, as expected.

ConanGhost

09-28-2018, 08:55 PM #6

3.9 ghz represents the intended performance boost for the Ryzen 5 2600, as expected.

Tavado
Senior Member

505

09-30-2018, 05:12 PM

Not every processor is the same. How are you tweaking your configurations? Are you relying on Ryzen Master or adjusting via the BIOS?

Tavado

09-30-2018, 05:12 PM #7

Not every processor is the same. How are you tweaking your configurations? Are you relying on Ryzen Master or adjusting via the BIOS?

Sebluigi
Senior Member

727

10-01-2018, 07:06 AM

I'm connecting via the BIOS, using the B450 Aorus Pro Wi-Fi, and the voltage is set to auto.

Sebluigi

10-01-2018, 07:06 AM #8

I'm connecting via the BIOS, using the B450 Aorus Pro Wi-Fi, and the voltage is set to auto.

jshi40700
Member

10-01-2018, 11:43 AM

Essentially, the maximum boost is 3.725 GHz. It doesn’t go higher because changing the BIOS to 3.9 GHz and saving didn’t work—Windows wouldn’t boot. The only solution is enabling the Auto option. Are there any steps you can take to resolve this?

jshi40700

10-01-2018, 11:43 AM #9

hrgriff
Senior Member

573

10-03-2018, 05:52 AM

#10

Which motherboard are you referring to?

hrgriff

10-03-2018, 05:52 AM #10

Which motherboard are you referring to?

Pages (2): 1 2 Next