F5F Stay Refreshed Hardware Desktop Overclocking Ram stopped working once more modules were added.

Overclocking Ram stopped working once more modules were added.

Overclocking Ram stopped working once more modules were added.

Pages (2): 1 2 Next
M
marc02nina04
Junior Member
Find
9
07-16-2017, 03:11 AM
#1
Motherboard: MSI x370 Pro Carbon RAM: Corsair 32GB 3200mhz CPU: Ryzen 1600 Hi! My initial PC setup used 2x4GB 3200mhz RAM, which operated at that speed. Around Christmas I upgraded to 2x8GB 3200mhz, and it also ran at 3200mhz. Those were great times. Now I’ve added another 2x8GB 3200mhz, but the A-XMP profile blocks booting, showing a safe shutdown at 2100mhz. What might be causing this issue? I’ve tested the newest BIOS versions and Release updates, but the problem persists. I’ve also adjusted RAM speed manually, sometimes reaching 2800mhz.
Reply
Reply
M
marc02nina04
07-16-2017, 03:11 AM #1

Motherboard: MSI x370 Pro Carbon RAM: Corsair 32GB 3200mhz CPU: Ryzen 1600 Hi! My initial PC setup used 2x4GB 3200mhz RAM, which operated at that speed. Around Christmas I upgraded to 2x8GB 3200mhz, and it also ran at 3200mhz. Those were great times. Now I’ve added another 2x8GB 3200mhz, but the A-XMP profile blocks booting, showing a safe shutdown at 2100mhz. What might be causing this issue? I’ve tested the newest BIOS versions and Release updates, but the problem persists. I’ve also adjusted RAM speed manually, sometimes reaching 2800mhz.

Reply
Reply
S
Sannetjhuuux
Senior Member
Find
257
07-23-2017, 02:04 PM
#2
Adjust the clock speed to 3200MHz and increase the voltage beyond the usual 1.35V. Raise it to about 1.45 of the maximum power, which should resolve the problems.
Reply
Reply
S
Sannetjhuuux
07-23-2017, 02:04 PM #2

Adjust the clock speed to 3200MHz and increase the voltage beyond the usual 1.35V. Raise it to about 1.45 of the maximum power, which should resolve the problems.

Reply
Reply
G
Glaeith
Member
Find
101
07-27-2017, 11:41 AM
#3
It differs from the original setup. Check SPD documentation for XMP support. If missing in BIOS, install AIDA64, navigate to motherboard → SPD, adjust frequency, timings, and DRAM voltage manually.
Reply
Reply
G
Glaeith
07-27-2017, 11:41 AM #3

It differs from the original setup. Check SPD documentation for XMP support. If missing in BIOS, install AIDA64, navigate to motherboard → SPD, adjust frequency, timings, and DRAM voltage manually.

Reply
Reply
Z
zShard
Member
Find
194
08-09-2017, 06:10 AM
#4
Check AIDA64 for timing details or use Extreme Memory Profile. The 1600MHz figure from Emp seems to be a reference point.
Reply
Reply
Z
zShard
08-09-2017, 06:10 AM #4

Check AIDA64 for timing details or use Extreme Memory Profile. The 1600MHz figure from Emp seems to be a reference point.

Reply
Reply
T
Tomcastle88
Member
Find
149
08-09-2017, 02:16 PM
#5
[ SPD ]------------------------------------------------------------------------------------------------- [ DIMM1: Corsair Vengeance LPX CMK16GX4M2B3200C16 ] Storage Details: Name - Corsair Vengeance LPX CMK16GX4M2B3200C16 Serial ID - None Size - 8 GB (16 banks per rank) Type - Unbuffered DIMM Memory Class - DDR4 SDRAM Speed (XMP) DDR4-3200 (1600 MHz) DDR4-2133 (1066 MHz) Bandwidth - 64-bit Module Voltage (XMP) 1.35 V Voltage Options - 1.2 V Error Checking Not Used Manufacturer - Samsung DRAM Model - Stepping 00h SDRAM Count Timings: @1600MHz XMP 20-18-18-36 CL-RCD-RP-RAS @1600MHz XMP 19-18-18-36 CL-RCD-RP-RAS @1600MHz XMP 18-18-18-36 CL-RCD-RP-RAS 1600MHz XMP 17-18-18-36 CL-RCD-RP-RAS @1600MHz 16-18-18-36 CL-RCD-RP-RAS 1501MHz XMP 15-17-17-34 CL-RCD-RP-RAS @1401MHz 14-16-16-32 CL-RCD-RP-RP-RAS @1301MHz XMP 13-15-15-30 CL-RCD-RP-RAS @1201MHz Serial - 11-13-13-25 XMP 10-12-12-23 XMP 900MHz XMP 9-11-11-21 XMP 1066MHz Memory Card Type - DDR4-3200 (XMP) 50-374-278-171-6-4-6-23 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @1066MHz Memory Card - 15-15-15-36 CL-RCD-RP-RAS / 50-374-278-171-6-4-6-23 @1037MHz 14-14-15-35 CL-RCD-RP-RAS / 49-363-270-166-6-4-6-22 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @962MHz Serial -12-12-13-30 XMP 11-11-12-27 XMP 38-286-212-131-5-4-5-18 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @740MHz 10-10-11-25 XMP 35-260-193-119-4-3-4-16 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @666MHz 9-9-10-22 XMP 54-559-415-255-9-6-36 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @31-234-174-107-4-3-4-14 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @38-286-212-131-5-4-5-18 @34-350-260-160-6-4-23 XMP 1501MHz Memory Card - 51-525-389-239-9-6-34 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @1401MHz 14-16-16-32 CL-RCD-RP-RAS / 48-490-363-223-8-6-31 XMP 1301MHz Memory Card - 44-455-338-207-8-5-29 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @1201MHz
Reply
Reply
T
Tomcastle88
08-09-2017, 02:16 PM #5

[ SPD ]------------------------------------------------------------------------------------------------- [ DIMM1: Corsair Vengeance LPX CMK16GX4M2B3200C16 ] Storage Details: Name - Corsair Vengeance LPX CMK16GX4M2B3200C16 Serial ID - None Size - 8 GB (16 banks per rank) Type - Unbuffered DIMM Memory Class - DDR4 SDRAM Speed (XMP) DDR4-3200 (1600 MHz) DDR4-2133 (1066 MHz) Bandwidth - 64-bit Module Voltage (XMP) 1.35 V Voltage Options - 1.2 V Error Checking Not Used Manufacturer - Samsung DRAM Model - Stepping 00h SDRAM Count Timings: @1600MHz XMP 20-18-18-36 CL-RCD-RP-RAS @1600MHz XMP 19-18-18-36 CL-RCD-RP-RAS @1600MHz XMP 18-18-18-36 CL-RCD-RP-RAS 1600MHz XMP 17-18-18-36 CL-RCD-RP-RAS @1600MHz 16-18-18-36 CL-RCD-RP-RAS 1501MHz XMP 15-17-17-34 CL-RCD-RP-RAS @1401MHz 14-16-16-32 CL-RCD-RP-RP-RAS @1301MHz XMP 13-15-15-30 CL-RCD-RP-RAS @1201MHz Serial - 11-13-13-25 XMP 10-12-12-23 XMP 900MHz XMP 9-11-11-21 XMP 1066MHz Memory Card Type - DDR4-3200 (XMP) 50-374-278-171-6-4-6-23 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @1066MHz Memory Card - 15-15-15-36 CL-RCD-RP-RAS / 50-374-278-171-6-4-6-23 @1037MHz 14-14-15-35 CL-RCD-RP-RAS / 49-363-270-166-6-4-6-22 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @962MHz Serial -12-12-13-30 XMP 11-11-12-27 XMP 38-286-212-131-5-4-5-18 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @740MHz 10-10-11-25 XMP 35-260-193-119-4-3-4-16 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @666MHz 9-9-10-22 XMP 54-559-415-255-9-6-36 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @31-234-174-107-4-3-4-14 RC-RFC1-RFC2-RFC4-RRDL-RRDS-CCDL-FAW @38-286-212-131-5-4-5-18 @34-350-260-160-6-4-23 XMP 1501MHz Memory Card - 51-525-389-239-9-6-34 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @1401MHz 14-16-16-32 CL-RCD-RP-RAS / 48-490-363-223-8-6-31 XMP 1301MHz Memory Card - 44-455-338-207-8-5-29 RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW @1201MHz

Reply
Reply
R
ricby
Senior Member
Find
681
08-15-2017, 08:17 AM
#6
I've attempted the first suggestion from @GoldenLag. The BIOS still failed to load properly. I've performed some troubleshooting steps. I placed each pair of 16GB into the motherboard, and they worked individually at 3200Hz. However, when all four were connected together, the frequency dropped to 3200mhz.
Reply
Reply
R
ricby
08-15-2017, 08:17 AM #6

I've attempted the first suggestion from @GoldenLag. The BIOS still failed to load properly. I've performed some troubleshooting steps. I placed each pair of 16GB into the motherboard, and they worked individually at 3200Hz. However, when all four were connected together, the frequency dropped to 3200mhz.

Reply
Reply
J
jonleflar
Member
Find
181
08-15-2017, 08:27 AM
#7
There are four RAM sticks installed. This likely explains the issue. The processor model you're using might require adjusting the voltage settings.
Reply
Reply
J
jonleflar
08-15-2017, 08:27 AM #7

There are four RAM sticks installed. This likely explains the issue. The processor model you're using might require adjusting the voltage settings.

Reply
Reply
S
SuperScout345
Member
Find
217
08-15-2017, 09:31 AM
#8
CPU model: Ryzen 1600
Reply
Reply
S
SuperScout345
08-15-2017, 09:31 AM #8

CPU model: Ryzen 1600

Reply
Reply
I
ionescunelutu
Member
Find
160
08-16-2017, 07:44 PM
#9
Reduce drop speed to 3000MHz. Boost SOC voltage to 1.1V and RAM voltage to 1.45. This should resolve the problems, possibly reaching 3200MHz—though the IF and memory controller may struggle at such speeds.
Reply
Reply
I
ionescunelutu
08-16-2017, 07:44 PM #9

Reduce drop speed to 3000MHz. Boost SOC voltage to 1.1V and RAM voltage to 1.45. This should resolve the problems, possibly reaching 3200MHz—though the IF and memory controller may struggle at such speeds.

Reply
Reply
M
mj18wals
Senior Member
Find
256
08-17-2017, 06:44 AM
#10
I'll provide a brief overview. The term might refer to the SOC voltage in MSI BIOS, but labels can vary. It's important to note that naming conventions aren't always consistent.
Reply
Reply
M
mj18wals
08-17-2017, 06:44 AM #10

I'll provide a brief overview. The term might refer to the SOC voltage in MSI BIOS, but labels can vary. It's important to note that naming conventions aren't always consistent.

Reply
Reply
Pages (2): 1 2 Next