Overclocking Pentium e6700
Overclocking Pentium e6700
Hello everyone,
This is my initial attempt at overclocking, and I’m completely unsure about the process. Here are my details:
CPU: Intel Pentium e6700 (base 3.2GHz)
MOBO: GA-G31M-ES2L (rev. 2.4)
RAM: 1x2GB @667MHz / 1x2GB @800MHz (4GB)
PSU: Nox Urano VX 650W
CPU cooler: [link]
I successfully pushed the CPU to 3.6GHz, but I can’t exceed that. I’m aware my cooler isn’t great, and temperatures stay under 35°C on the board and 43°C on the CPU. Could it be the motherboard that’s restricting my overclocking? I’ve read that GBART boards aren’t ideal for high overclocks. I managed to run Windows at up to 3.8GHz, but it crashes when under stress. My BIOS settings might also be incorrect since I’m not confident in my configuration.
I noticed a significant improvement from previous attempts, so I was curious if I could squeeze out more performance. This build is just a secondary PC, so I’m not too concerned.
Thanks a lot,
- Matthew
If you're unsure about what you're doing, it's best to stop the overclock and revisit it later when you're more confident. This approach reduces unnecessary strain on your system and minimizes the risk of serious issues.
None of your parts are ideal for overclocking; especially the power supply unit is poor. If you aim for improved performance, it's time to consider a full replacement.
If you're unsure about what you're doing, it's best to stop the overclock and revisit it later when you're more confident. Running your system under heavy stress can cause serious problems.
In any case, none of your parts are designed for overclocking; your power supply is especially bad. If you really need improved performance, it's time to replace everything with a proper upgrade.