Overclocking Kingston HyperX Savage HX316C9SRK2/8 requires assistance!
Overclocking Kingston HyperX Savage HX316C9SRK2/8 requires assistance!
Z87M-Plus i4790k 4.6
Zalman CNPS10X Performa
2x 8 Kingston HyperX Savage 1600 DDR3
Found this timing on a competitive site but I'm unsure how to adjust the BIOS due to too many numbers
1866 10-11-11-28 2T 1.55 V
2133 11-12-12-30 2T 1.60 V
http://imgur.com/a/dZO28
EDIT: Scrolled down and discovered voltage option at the end
Looking to reach a minimum of 1866.
1866: CAS Latency=10, RAS to CAS=11, RAS Pre time=11, RAS Act time=28, Command Rate=2
same applies for 2133 with adjusted values.
Overclocking 8gb of RAM isn't assured; you might need to adjust CAS Latency timing to 11. Stability should be verified with memtest86 afterward.
1866: CAS Latency=10, RAS to CAS=11, RAS Pre time=11, RAS Act time=28, Command Rate=2
same applies for 2133 with adjusted values.
Overclocking 8gb of RAM isn't assured; you might need to adjust CAS Latency timing to 11. Stability should be verified with memtest86 afterward.
I will verify the stability of the RAM after performing the task.
Tests finished for 1866 and 2133. No issues found.
Will overheating be a concern?
System temperature stays normal even under heavy use.
Perfect performance with up to 1.6 volts, no problems detected.
Want to try 2400 on memtest86 so intensely with 13-14-14-35 2T 1.65 but I think it's way too much.
Already achieved +40 average fps in game Overwatch.
I think buying DDR3 2400 good RAM will give more improvement than the old one.
Wanting to check 2400 on memtest86 so intensely with 13-14-14-35 2T 1.65 but I think it's way too much.
Already achieved +40 average fps in Overwatch.
Probably buying DDR3 2400 good RAM will give more improvement than the old one.
You can try it. It's all about silicon lottery. Safe until 1.65 V. There are more factors involved, not just the memory chips. Your motherboard and power supply should handle the extra load on the memory controller. Good luck!