Overclocking isn't working (seems like I've done everything).
Overclocking isn't working (seems like I've done everything).
I recently upgraded my CPU to an i5-7600K and am attempting to overclock it. When adjusting the settings in my BIOS, the clock speed updates after saving and restarting. However, during a stress test and using HWMonitor, the clock speed still caps at 3400MHz. My BIOS is set to a 51x multiplier, but the BIOS clock speed reads 5100MHz. I've noticed the temperatures are rising as well. What could be causing this?
Here’s my current setup:
CPU: Intel - Core i5-7600K
CPU Cooler: Corsair H60 54.0 CFM Liquid CPU Cooler
Motherboard: Gigabyte GA-Z170X-Gaming 3 ATX LGA1151
Memory: Crucial Ballistix Sport LT 8GB (2 x 4GB) DDR4-2400
Storage: Samsung 850 EVO 250GB M.2-2280 SSD
Western Digital BLACK SERIES 1TB 3.5" 7200RPM HDD
Video Card: Gigabyte GeForce GTX 1060 6GB
Case: Fractal Design Define R5 w/Window (Black) ATX Mid Tower
Power Supply: EVGA SuperNOVA G2 850W 80+ Gold Certified Modular
OS: Microsoft Windows 10 Home OEM 64-bit
Bios version: F21
I’ve tried enabling memory XMP, booted in legacy and UEFI, adjusted Intel Turbo Boost, modified voltages, but haven’t seen any change in clock speeds. Please help! Thanks!
Let's start with the basics.
CMOS clear likely isn't necessary, but since you've been messing with XMP settings, I'd at least do a Load Optimized Defaults.
Here's what I'd do:
1) Go into BIOS Setup and press F7 to Load Optimized Defaults.
2) Go to Advanced Frequency Settings in the MIT tab. Set CPU Clock Ratio to 44 (4.4GHz) to start with.
3) Go to Advanced CPU Core Settings in the MIT tab. Set Intel Turbo Boost Technology to Disabled.
4) Press F10 to Save and Exit.
5) Windows starts. Open the Start Menu and type choose a power plan. Click on the search result.
6) Make sure High Performance is selected. If it isn't please select it now.
7) Click on Change Plan Settings to the right of High Performance.
8) Change Advanced Power...
Remove the CMOS battery for a minute and then reinstall it. Is quiet and silent while doing that?
Sure, I'll check again and search thoroughly for that setting.
vapour :
remove cmos battery for 1 min and put back. Is cool n quiet off?
This is a Z170 board. There's no Cool N Quiet on this board.
Let's start with the basics.
CMOS clear likely isn't necessary, but since you've been messing with XMP settings, I'd at least do a Load Optimized Defaults.
Here's what I'd do:
1) Go into BIOS Setup and press F7 to Load Optimized Defaults.
2) Go to Advanced Frequency Settings in the MIT tab. Set CPU Clock Ratio to 44 (4.4GHz) to start with.
3) Go to Advanced CPU Core Settings in the MIT tab. Set Intel Turbo Boost Technology to Disabled.
4) Press F10 to Save and Exit.
5) Windows starts. Open the Start Menu and type choose a power plan. Click on the search result.
6) Make sure High Performance is selected. If it isn't please select it now.
7) Click on Change Plan Settings to the right of High Performance.
8) Change Advanced Power Settings.
9) Processor>Maximum Processor State: 100%, Minimum Processor State:100%.
10) OK, Save Changes, close the window.
Now just check to see if system behavior has improved.
Note that Vapour's recommendation for 46 instead of 44 would likely work as well, but I like to start small just to be sure that the motherboard isn't going to throw a fit.
Take a look at the BIOS version F22D details, which mentions updating the CPU micro code to resolve a specific issue. However, modifying the CPU microcode can impact the entire processor, potentially altering its overall performance. It's wise to consider updating to BIOS version F22D.