Overclocking i5 7600k on ASUS z170 motherboard
Overclocking i5 7600k on ASUS z170 motherboard
I've been experimenting with my custom-built computer, aiming to push the overclock to 4.5Ghz or above.
I adjusted the settings to a 100 BCLK Frequency ratio, 45-48 for CPU core ratios, and 40-44 for cache ratios.
I disabled boost and other features so I could control the process manually.
The voltage remains at 1.300 as usual.
When I start Windows, it caps at 3.8-4.0 Ghz.
Am I missing a specific setting? I think I've tried everything possible. The target frequency, cache, and RAM match my expectations, but the system doesn't reach them consistently across different boot inputs.
If you need more details, just let me know and I'll share them.
This useful manual could assist you:
http://www.tweaktown.com/guides/7481/twe...index.html
Well if you're not even starting Windows, the system is really shaky. Getting into Windows is usually the simple part for an overclocked CPU; it's during the stress tests that you're most likely to run into bluescreens. I'd recommend setting your voltage to manual, booting with the standard voltage to confirm stability at normal clock speeds, then gradually increase the speed in 100MHz increments while running stress tests. If you encounter a failure or a bluescreen, raise the voltage slightly and retry. You should also monitor temperatures closely—Kaby Lake tends to get hot, especially when pushing up to 1.3V or more, so ensure your cooler is properly installed or functioning well if you're using a weak one.
You might be correct about losing the lottery. That's the only explanation that fits right now.
What? I thought I could boot into Windows without issues. I don’t see any blue screens, everything seems normal, but the frequency isn’t increasing. How are you keeping an eye on the clock speed? Do you notice it changing in Task Manager or CPU-Z during a stress test? What tool are you using for that test? Perhaps verify your Windows power settings to rule out any power-saving configurations.
I rely on the task manager, and I've configured the power settings to performance. I run Prime95 for testing.