F5F Stay Refreshed Power Users Overclocking Overclocking Gigabyte GTX 770 (2GB) leads to significant performance drops.

Overclocking Gigabyte GTX 770 (2GB) leads to significant performance drops.

Overclocking Gigabyte GTX 770 (2GB) leads to significant performance drops.

I
iron_finder1
Posting Freak
750
08-13-2016, 08:06 PM
#1
Today I chose to push my Gigabyte gtx 770 to its limits, achieving smooth 58fps at 1080p with a core of 1333mhz and memory at 3855mhz (7710mhz effective). When I increased the memory clock it started throttling significantly, dropping to around 810mhz and 1ghz core. I feared a failure but temperatures stayed under 70°C. I’m concerned my PSU might be struggling, could this be the case? It’s a 620w 80plus bronze Antec Neo Eco 620c. Do I have sufficient power? Should I be concerned about exceeding its capacity? For reference, I also have an i5 2400 and a single hard drive connected to the PSU alongside the 770. After rebooting, the system ran well at stock performance, though it showed some stutter during overclocking.
I
iron_finder1
08-13-2016, 08:06 PM #1

Today I chose to push my Gigabyte gtx 770 to its limits, achieving smooth 58fps at 1080p with a core of 1333mhz and memory at 3855mhz (7710mhz effective). When I increased the memory clock it started throttling significantly, dropping to around 810mhz and 1ghz core. I feared a failure but temperatures stayed under 70°C. I’m concerned my PSU might be struggling, could this be the case? It’s a 620w 80plus bronze Antec Neo Eco 620c. Do I have sufficient power? Should I be concerned about exceeding its capacity? For reference, I also have an i5 2400 and a single hard drive connected to the PSU alongside the 770. After rebooting, the system ran well at stock performance, though it showed some stutter during overclocking.

P
proboy25
Junior Member
17
08-15-2016, 08:57 AM
#2
I wouldn't stress too much, I believe you've reached your ideal overclock.
Typically, once you hit failure, reduce the settings slightly and that's your final OC.
For a machine running nonstop, lower it a bit more to ensure stability.
Monitor temperatures, voltage, performance, etc., to catch any issues early.
Peace
P
proboy25
08-15-2016, 08:57 AM #2

I wouldn't stress too much, I believe you've reached your ideal overclock.
Typically, once you hit failure, reduce the settings slightly and that's your final OC.
For a machine running nonstop, lower it a bit more to ensure stability.
Monitor temperatures, voltage, performance, etc., to catch any issues early.
Peace

B
Blobbers98
Junior Member
23
08-15-2016, 09:58 AM
#3
I wouldn't stress too much, I believe you've reached your ideal overclock.
Typically, once you hit failure, reduce the settings slightly and that's your final OC.
For a machine running nonstop, lower it a bit more to ensure stability.
Monitor temperatures, voltage, performance, etc., to catch any issues early.
Peace
B
Blobbers98
08-15-2016, 09:58 AM #3

I wouldn't stress too much, I believe you've reached your ideal overclock.
Typically, once you hit failure, reduce the settings slightly and that's your final OC.
For a machine running nonstop, lower it a bit more to ensure stability.
Monitor temperatures, voltage, performance, etc., to catch any issues early.
Peace

J
Jz_Captain
Member
71
08-15-2016, 01:16 PM
#4
I wouldn't stress too much, it seems you've reached your ideal overclock setting. Usually, after testing until failure, you can fine-tune the values and that's your final OC. For a machine that runs nonstop, reduce the settings slightly for better stability. Monitor temperatures, voltage, performance, etc., to catch any issues early.

Peace,
Cheers for the response, I agree—my system is now stable at nearly 8ghz with 1.3ghz core, no overvoltage detected. It looks like the problem was with the voltage, even though it only had a +5mV drop. With a moderate fan profile, it now holds steady around 59°C under load and 35-30°C when fans are off. I managed about 5 extra frames in some games and less stuttering in Forza because of the faster memory. As I approach 2GB, I expect an upgrade to a 970 or 1060 soon!
J
Jz_Captain
08-15-2016, 01:16 PM #4

I wouldn't stress too much, it seems you've reached your ideal overclock setting. Usually, after testing until failure, you can fine-tune the values and that's your final OC. For a machine that runs nonstop, reduce the settings slightly for better stability. Monitor temperatures, voltage, performance, etc., to catch any issues early.

Peace,
Cheers for the response, I agree—my system is now stable at nearly 8ghz with 1.3ghz core, no overvoltage detected. It looks like the problem was with the voltage, even though it only had a +5mV drop. With a moderate fan profile, it now holds steady around 59°C under load and 35-30°C when fans are off. I managed about 5 extra frames in some games and less stuttering in Forza because of the faster memory. As I approach 2GB, I expect an upgrade to a 970 or 1060 soon!