F5F Stay Refreshed Hardware Desktop Overclocking a RAM module.

Overclocking a RAM module.

Overclocking a RAM module.

O
Op_Swat_Cow
Member
Find
69
11-20-2016, 05:53 AM
#1
Hey, your purchase and setup seem solid. The specs you got look good for a stable build. Overclocking to 3600MHz and keeping the voltage at 1.3V is within typical safe ranges for most kits. However, if your RAM starts burning after an hour of gaming, it could be due to thermal issues or improper cooling. Make sure your case and fans are handling the heat properly. Double-check the temperature readings and consider improving airflow if needed.
Reply
Reply
O
Op_Swat_Cow
11-20-2016, 05:53 AM #1

Hey, your purchase and setup seem solid. The specs you got look good for a stable build. Overclocking to 3600MHz and keeping the voltage at 1.3V is within typical safe ranges for most kits. However, if your RAM starts burning after an hour of gaming, it could be due to thermal issues or improper cooling. Make sure your case and fans are handling the heat properly. Double-check the temperature readings and consider improving airflow if needed.

Reply
Reply
L
l2flee
Junior Member
Find
15
11-20-2016, 01:24 PM
#2
I checked the stability by running consistent tests under various loads and conditions.
Reply
Reply
L
l2flee
11-20-2016, 01:24 PM #2

I checked the stability by running consistent tests under various loads and conditions.

Reply
Reply
C
CuzImSlasher
Member
Find
114
11-20-2016, 03:36 PM
#3
If it's stable... This situation can be tricky to verify. I'd go over the instructions several times... https://github.com/integralfx/MemTestHel...aster/DDR4 OC Guide.md Then follow the recommended methods, using a reliable tool like memtesthelper. Launch it with as many threads as your processor supports, keep running until all exceed 500%, and then you should see the results.
Reply
Reply
C
CuzImSlasher
11-20-2016, 03:36 PM #3

If it's stable... This situation can be tricky to verify. I'd go over the instructions several times... https://github.com/integralfx/MemTestHel...aster/DDR4 OC Guide.md Then follow the recommended methods, using a reliable tool like memtesthelper. Launch it with as many threads as your processor supports, keep running until all exceed 500%, and then you should see the results.

Reply
Reply