F5F Stay Refreshed Power Users Overclocking Overclock past a bottleneck?

Overclock past a bottleneck?

Overclock past a bottleneck?

F
Fozzo
Junior Member
15
12-03-2016, 11:16 AM
#1
Hi, I'm planning to purchase a GTX 1070 and have an i5-3470. I don't want you to advise me to upgrade my CPU first since I'll do that soon. However, if the GPU speed isn't enough after buying the card, can I easily overclock my CPU without affecting its performance? Or is it even feasible to push beyond a bottleneck? Thanks for your help!
F
Fozzo
12-03-2016, 11:16 AM #1

Hi, I'm planning to purchase a GTX 1070 and have an i5-3470. I don't want you to advise me to upgrade my CPU first since I'll do that soon. However, if the GPU speed isn't enough after buying the card, can I easily overclock my CPU without affecting its performance? Or is it even feasible to push beyond a bottleneck? Thanks for your help!

G
Gabokazu
Posting Freak
814
12-03-2016, 11:45 AM
#2
The 3470 CPU isn't a K model, so you're not allowed to overclock it. Just keep in mind you can only overclock it on Z87/97 boards with a K CPU at all. The answer is no.
G
Gabokazu
12-03-2016, 11:45 AM #2

The 3470 CPU isn't a K model, so you're not allowed to overclock it. Just keep in mind you can only overclock it on Z87/97 boards with a K CPU at all. The answer is no.

C
CapitanMario
Junior Member
14
12-03-2016, 02:37 PM
#3
The 3470 CPU isn't a K model, so you're not allowed to overclock it. Just keep in mind you can only overclock it on Z87/97 boards with a K CPU at all. The answer is no.
C
CapitanMario
12-03-2016, 02:37 PM #3

The 3470 CPU isn't a K model, so you're not allowed to overclock it. Just keep in mind you can only overclock it on Z87/97 boards with a K CPU at all. The answer is no.

E
explizip
Member
227
12-03-2016, 08:03 PM
#4
Technically you can change the output via Bclk, but that line is connected to the PCI-E bus and the Sata ports too, so you'll also be affecting them. The maximum is around 103, anything higher could cause random crashes. It's not worth trying.
E
explizip
12-03-2016, 08:03 PM #4

Technically you can change the output via Bclk, but that line is connected to the PCI-E bus and the Sata ports too, so you'll also be affecting them. The maximum is around 103, anything higher could cause random crashes. It's not worth trying.