overclock asus 650 ti 2gb
overclock asus 650 ti 2gb
When you proceed in small steps, there shouldn't be any concern about experiencing a headache during troubleshooting if it doesn't work. You might consider a slight overclock without changing the voltage, but there will be limits. Use afterburner for the overclock and try unigine's valley for benchmarking. There is another program commonly used for benchmarking, but its name is hard to recall right now. That one tends to push your GPU too much, and I've personally experienced a GPU failure after using it for benchmarking (without any overclocking, it was just old).
The 400watt PSU might not be sufficient during overclocking. It's currently running at stock levels, which I believe you should ideally upgrade to around 450 watts. When adjusting the GPU voltage, especially during overclocking, you enter a more risky area where HZ and VRAM can be adjusted with tools like the afterburner program. If the voltage becomes too high, it could cause instability and crashes. You can gradually reduce the voltage until the issue stops occurring. Also, monitor the GPU temperatures closely—keeping them below 90-100°C is important, even though that range is quite wide.
I'm not overly concerned about the PSU, as my CPU and GPU are quite energy efficient. I have a very basic PC—Xeon E3-1225, 2x 2GB + 1x4GB DDR3, stock fans, one hard drive, a CD player, and that's it. Could it be possible to maintain the default voltage by using very small 10 MHz steps, ensuring the core clock stays under 60 MHz and memory speed below 90 MHz? And which free program would you suggest for benchmarking my PC? Would there be any risk of losing the display signal, BSOD, or major issues with that very small PC I plan to use? Thanks a lot for your time.
When you proceed in small steps, there shouldn't be any concern about experiencing a headache during troubleshooting if it doesn't work. You might consider a slight overclock without changing the voltage, but there will be limits. Use afterburner for the overclock and try unigine's valley for benchmarking. There is another program commonly used for benchmarking, but its name is hard to recall right now. That one tends to push your GPU too much, and I've personally experienced a GPU failure after using it for benchmarking (without any overclocking, it was just old).