Overclock 6600k in Asus Z170 pro gaming setup
Overclock 6600k in Asus Z170 pro gaming setup
Hello everyone
I have a query regarding ASUS automatic overclocking in the BIOS!
I configured EZ System Tuning to ASUS optimal and enabled X.M.P.
system -->>
cpu: core i5 6600k
MB: ASUS Z170 pro gaming
RAM: G. Skill Ripjaws 2x8 GB 2400 MHz
GPU: Radeon HD 4670 (not intended for gaming)
cooler: deepcool iceedge mini fs v2 CPU cooler + 1x120mm intake + 1x120 exhaust
PSU: Green 600-hp Bronze (600w)
I typically run the system for numerical simulations on 4 cores with maximum fan speed.
When idle, the CPU multiplier increases to 43, which corresponds to a clock speed of about 4.3 GHz, with the core voltage varying between 0.784V and 1.114V. The package temperature stays around 24–25°C.
The issue arises under full load when using commercial software for simulations on 4 cores. The multiplier remains fixed at 41, and the CPU core voltage drops to around 1.245V. The maximum package temperature reaches up to 63°C, averaging about 53°C.
Why don’t I get the stable 4.3 GHz during simulations? Is this typical behavior when using automatic ASUS overclocking?
Thank you in advance.
Avoid using the auto overclock feature. Maintaining a steady voltage is important; otherwise, it could fluctuate widely. For instance, your voltage might drop to 1.2 and then rise outside the safe operating range. Use the UEFI Bios for manual overclocking, which is straightforward. Adjust the multiplier to match your target speed—like setting it to 43 for a 4.3ghz goal. Set the core voltage manually and apply a specific voltage value for your CPU. After making these changes, save your settings and restart your computer. Perform stress tests lasting at least an hour to verify stability; if successful, your overclock is reliable.
Never rely on programs to boost performance beyond specifications!!!!!! What alternatives exist for Skylake?
Avoid using the auto overclock function to prevent voltage fluctuations. Your voltage might swing from 1.2 to unsafe levels. Use the UEFI Bios for manual overclocking, which is straightforward. Adjust your multiplier to match your target speed—like entering 43 for 4.3ghz. Set core voltage manually and apply a specific supply voltage, such as 1.3. After saving, restart and perform stress tests for at least an hour to verify stability. If successful, your overclock will be reliable.
Don't rely on auto overclock settings. You want to avoid voltage fluctuations. Your voltage could swing from 1.2 to unsafe levels. Check the detailed guide here: http://www.overclock.net/t/1570313/skyla...statistics. Watch this video for more understanding: https://m.youtube.com/watch?v=7pL_n5l4gWU. I've tried manual overclocking on Skylake and set the multiplier to 44 with CPU Core/Cache Voltage at 1.155v. The clock stays steady at 4.4 GHz under load, but the voltage still varies slightly. Different readings appear in AI Suite, CPU-z, and HWMonitor. I've also learned to start at 1.35v and verify normal booting. My CPU boots fine with 1.155v in BIOS, yet I'm seeing other values. Running stress tests with Prim95 shows a max temperature of 63°C at full fan speed.