OPTIMAL RYZEN 3600X CONFIGURATIONS!* (Cinebench R20: 3925+) EXCEPTIONAL ONE-CORE RESULTS
OPTIMAL RYZEN 3600X CONFIGURATIONS!* (Cinebench R20: 3925+) EXCEPTIONAL ONE-CORE RESULTS
Sure thing! Here’s a rephrased version of your text:
Hey everyone, if you want to maximize performance from your Ryzen 3600X while keeping things smooth under light use, this guide is just for you. I’ve seen over a 10% boost on most tests compared to the stock settings and typical PBO recommendations. I recently assembled a mid-range gaming rig and here are my key specs:
Processor: Ryzen 3600X (Can hit up to 4.475Ghz on two cores, around 4.25-4.35 Ghz on all cores during heavy use. Runs at 1900 MHz with Infinity Fabric).
Cooler: Fractal S36 360mm AIO with a 6-speed fan system. BIOS MOBO: Asus Prime X570-PRO (adequate but fine).
RAM: 32 GB (four 8GB modules) G.Skill Ripjaws V DDR4 (HYNIX). (DOCP: 3600 16-19-19-39 @ 1.35V – actually running at 1.4V)
Storage: NVMe M.2 SSD, 500 GB Samsung 970 Evo Plus
Power Supply: Fractal Design 660W Platinum Certified
GPU: RTX 2070 Super Case
After several adjustments, I’m consistently hitting benchmark scores well above what most users achieve, especially compared to those who stick to conservative settings.
Before we dive in, keep in mind these are tailored for everyday use. Fans run quietly, CPU stays under 72°C, and idle temps hover around 30°C. I’m comfortable with the voltages all the time, though results can vary.
Here’s how I got these numbers:
- Restored BIOS to default settings.
- Used AI Tweaker to tweak VRM and DIO settings.
- Set VDCP to 3600 16-19-19-39 @ 1.35V.
- RAM voltage at 1.4V.
- Adjusted RAM frequency in a controlled way, keeping the ratio 1:1.
- Enabled DOCP, changed SOC voltage offset to help with Infinity Fabric.
- Ran benchmarks after rebooting and confirming stability.
Try increasing FCLK and memory frequency gradually, checking for consistency. Some settings may not suit everyone, but I hope these tips help you.
If you need more advanced tweaks or want to push this further without full manual overclocking, let me know!
I refresh the bottom of the post with fresh R23 results. Could you share your own scores as well? I’m still getting used to the system and haven’t fully settled on R23 stats yet. My numbers are around 10,300 for core average and 1,310 for single core. I kept the same settings except for setting process priority to realtime. I managed to increase my flck to 1866 and RAM to 3666. Apart from a few installs and using this OS for about a year, I’m seeing around 4,399Mhz across all cores and up to 4,475Mhz on single core benchmarks like Geekbench and gaming.
Multi-Core specs: R5 3600 @ 3.6GHz, 8887; R5 3600 @ 4.4GHz, 10232; Single-Core: R5 3600 @ 3.6GHz, 1241; R5 3600 @ 4.4GHz, 1309; 4.5GHz, 1338. This was a manual overclock, using a B550 Aorus Pro AC Ryzen 5 3600 and Hyper 212 EVO BE. RAM is 3200MHz CL15.
These results are impressive. It seems I likely earned a golden chip since I'm achieving comparable scores using only PBO. These chips appear to have minimal room for error, allowing PBO to capitalize by timing boosts when stability appears. Perhaps the 3600x offers slightly more flexibility than the 3600. At first launch, they seemed distinct categories, but over time the gaps likely narrowed. I also successfully matched the Spy score with just a 600-point difference from the world leader using a Ryzen 3600x and 2070 Super.