Only audio is sent to the left speaker.

Pages (2): 1 2 Next

Spnky2324
Junior Member

06-18-2018, 10:34 PM

I just purchased an Edifier 1700BT since headphones were becoming too hot in the heat. I turned off the onboard HD audio to avoid the annoying issue with nahimic, as I’ve been using Steelseries Arctis 7 for the last two years. My motherboard is an MSI Z390 Gaming Edge AC with Realtek built-in speakers. After connecting the speakers and enabling onboard audio, I plugged everything in—making sure to connect the speaker to the 3.5mm jack via the included aux cable. When I played a YouTube video, only the left speaker was working. I’ve tried many fixes, including updating Realtek drivers, but Windows still treats it like a surround device. Any advice? I was excited about this upgrade!

Spnky2324

06-18-2018, 10:34 PM #1

maxharp
Member

06-20-2018, 06:16 PM

Usually these sound settings need to be set correctly for them to function properly. The audio software might request the device type, so choosing the right option—like 'stereo audio output'—is important.

maxharp

06-20-2018, 06:16 PM #2

malbaz72
Junior Member

06-25-2018, 02:03 AM

I don't see any similar programs available for your PC. I attempted to adjust the sound settings, but it didn't work.

malbaz72

06-25-2018, 02:03 AM #3

I don't see any similar programs available for your PC. I attempted to adjust the sound settings, but it didn't work.

AlexPFM7
Member

06-26-2018, 01:59 PM

It sounds like the issue might be with the back panel connector rather than the front one. You're probably wondering if you're making a mistake in your setup.

AlexPFM7

06-26-2018, 01:59 PM #4

It sounds like the issue might be with the back panel connector rather than the front one. You're probably wondering if you're making a mistake in your setup.

pitbuilder27
Member

06-26-2018, 05:47 PM

Are there additional devices you'd like to connect to this port? Other options include headphones, speakers, or similar equipment.

pitbuilder27

06-26-2018, 05:47 PM #5

Are there additional devices you'd like to connect to this port? Other options include headphones, speakers, or similar equipment.

ExtasyFox
Member

177

06-29-2018, 11:00 PM

Ensure all connections are secure and complete the entire setup. 1. Play audio through any other device to verify functionality. 2. Verify equal sound levels on the left and right channels in the system settings.

ExtasyFox

06-29-2018, 11:00 PM #6

Mobarley7
Member

186

07-03-2018, 11:52 PM

I located the box for my headphones and tested it; it worked similarly. The only issue was the left side audio, which still functions well on the front panel, though I recall why I turned it off before using the jack—it caused a lot of static.

Mobarley7

07-03-2018, 11:52 PM #7

FoolHardyHG
Member

07-04-2018, 08:38 AM

Verified audio outputs through Bluetooth; all functions operate correctly. Panel connector works too, though the build feels somewhat unstable. Settings are properly configured.

FoolHardyHG

07-04-2018, 08:38 AM #8

Verified audio outputs through Bluetooth; all functions operate correctly. Panel connector works too, though the build feels somewhat unstable. Settings are properly configured.

Viizion_PvPz
Senior Member

670

07-05-2018, 02:35 AM

Adjust your audio settings to route output from the rear port. Ensure front-facing sound quality matches the rear without noticeable differences, even in noisy environments.

Viizion_PvPz

07-05-2018, 02:35 AM #9

Adjust your audio settings to route output from the rear port. Ensure front-facing sound quality matches the rear without noticeable differences, even in noisy environments.

gaarSwift
Junior Member

07-05-2018, 12:51 PM

#10

You’d start by gathering the necessary steps and then follow them carefully.

gaarSwift

07-05-2018, 12:51 PM #10

You’d start by gathering the necessary steps and then follow them carefully.

Pages (2): 1 2 Next