Not possible to increase the clock speed of your graphics card on a 4300GE.
Not possible to increase the clock speed of your graphics card on a 4300GE.
I have an X300 deskmini and I attempted to boost the graphics via BIOS settings, but it just shut everything down. I had to reset the BIOS by taking it apart and removing the battery. I’m trying to avoid mistakes again, so I need to understand the recommended configurations. Your current setup is 2500mhz and 1.2000 volts—BIOS limits are 2500mhz and 1.55 volts.
You tried implementing an 800MHz OC on the GPU, but it didn’t function properly. The aim seems to be boosting performance, though the results were minimal—only a slight improvement at most.
The CPU isn't heavily utilized, yet I engage in light gaming and even at low 720p I sometimes struggle with consistent 60fps. My goal is to enhance the IGPU performance, not push it to maximum intensity like Crysis. Cooling should remain manageable given the 35W power rating, and I aim for a 10% performance boost without overloading it.
Like all custom builds, your performance will differ. We can't predict exact hit values. Instead, consider running the board without a CMOS battery to avoid the issue. As long as the system stays powered, it should work—unless the board won't start with a dead battery. Then you can reset it by briefly cutting power, which will refresh the CMOS automatically. Monitor your settings, adjust them as needed, and once optimized, replace the battery and re-enter the values.